Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 326E

John Deere 326E Specifications

The John Deere 326E skid steer loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98CT 4-cylinder turbocharged intercooled diesel engine with a rated power of 70 hp (52.5 kW) at 2500 rpm. The John Deere 326E is equipped with a vertical-lift loader boom, one-speed or two-speed hydrostatic transmission, 100HD drive chains, and 12.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 21 gpm (79.6 lpm) or 29 gpm (109.9 lpm). The skid steer loader has a rated operating capacity of 2690 lbs (1220 kg) and tipping load of 5380 lbs (2445 kg). The lift height is 125.4" (3185 mm) to hinge pin, and dump height is 99.9" (2535 mm).

Engine Specs

Engine Model ...................... Yanmar 4TNV98CT
Engine Type ...................... 4-cylinder turbocharged intercooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.0 (52.5)
Maximum Engine Power, hp (kW) ...................... 74.0 (54.8)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 280 (207)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 24.0 (91.0)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 70

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100HD roller chains
Brakes Type ...................... Hydraulic wet disc
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Maximum Speed (Single), mph (kph) ...................... 6.5 (10.5)
Maximum Speed (Two), mph (kph) ...................... 10.0 (16.1)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow (Standard), gpm (Lpm) ...................... 21.0 (79.6)
Pump Flow (High-Flow), gpm (Lpm) ...................... 29.0 (109.9)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Tank Capacity, gal (L) ...................... 7.0 (26.5)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2690 (1220)
Tipping Load, lbs (kg) ...................... 5380 (2445)
Boom Breakout Force, lbs (kg) ...................... 5000 (2270)
Bucket Breakout Force, lbs (kg) ...................... 7750 (3520)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 48.3 (1225)
Height (Operator Cab), in (mm) ...................... 83.3 (2115)
Length (w/o Bucket), in (mm) ...................... 120 (3050)
Length (Bucket On Ground), in (mm) ...................... 144 (3655)
Width (w/o Bucket), in (mm) ...................... 72.6 (1845)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 125.4 (3185)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 99.9 (2535)
Dump Reach At Max Height, in (mm) ...................... 33 (840)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 9.7 (245)
Turning Radius (w/Bucket), in (mm) ...................... 85.5 (2170)
Shipping Weight, lbs (kg) ...................... 7480 (3400)
Operating Weight, lbs (kg) ...................... 8200 (3720)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS