Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 3300V |
Mustang 3300V Specifications
TThe Mustang 3300V NXT2 skid steer loader driveline system components: a 202.6 cu.in (3.32L) Yanmar 4TNV98CT-NMS 4-cylinder turbocharged diesel engine with a rated power of 70.7 hp (52.7 kW), and 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 23.5 gal/min (89.6 l/min) or 35 gal/min (132.6 l/min). The Mustang 3300V NXT2 is equipped with a vertical-lift boom, 100H drive chains, and 14x17.5 HD tires. The skid steer loader has a max lift height of 131.2" (3330 mm) to hinge pin and dump height of 98.5" (2500 mm). The rated operating capacity is 3300 lbs (1497 kg), and tipping load is 6600 lbs (2995 kg).
Engine Specs |
Engine Model ...................... Yanmar 4TNV98CT-NMS
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.6 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.7 (52.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 294 (217)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 24.5 (92.7)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Two (Low-high)
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 14x17.5 HD
Rear Tire Size ...................... 14x17.5 HD
Chaincase Capacity, qts (L) ...................... 10.1 (9.5)
Maximum Speed (Low), mph (km/h) ...................... 8.1 (13.0)
Maximum Speed (High), mph (km/h) ...................... 12.2 (19.6)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.5 (89.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 35.0 (132.6)
System Pressure, Bar (psi) ...................... 220 (3200)
Hydraulic Reservoir Capacity, gal (L) ...................... 10.5 (39.7)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 3300 (1497)
Tipping Load, lbs (kg) ...................... 6600 (2995)
Loader Boom Type .................... Vertical-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 49.5 (1255)
Height (Operator Cab), in (mm) ...................... 82 (2085)
Height (Boom Raised), in (mm) ...................... 172 (4370)
Length (w/o Bucket), in (mm) ...................... 119 (3025)
Length (Bucket On Ground), in (mm) ...................... 152.5 (3875)
Width (w/o Bucket), in (mm) ...................... 72 (1830)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 131.2 (3330)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 98.5 (2500)
Dump Reach At Max Height, in (mm) ...................... 32 (815)
Rollback Angle At Ground Level, deg ...................... 29
Rollback Angle At Max Height, deg ...................... 94
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 94.5 (2400)
Turning Radius (Front w/o Bucket), in (mm) ...................... 56 (1420)
Turning Radius (Rear), in (mm) ...................... 69.5 (1765)
Operating Weight, lbs (kg) ...................... 9090 (4125)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |