____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L175 |
New Holland L175 Specifications
The
New Holland L175 skid steer loader driveline system components: a 135 cu.in
(2.2L) Shibaura N844LT 4-cycle 4-cylinder turbocharged liquid-cooled diesel
engine with a rated power of 60 hp (45 kW), and 1-speed or 2-speed hydrostatic
transmission. The hydraulic system has a pump with a rated capacity of 17.2
gal/min (65.2 l/min). The system pressure is 2500 psi (172 bar). The New Holland
L175 is equipped with 80 HD roller chains and 12x16.5 tires. The skid steer
loader has a boom lifting force of 3000 lbs (1360 kg) and bucket breakout force
of 4312 lbs (1955 kg). The rated operating capacity is 2000 lbs (907 kg), and
tipping load is 4000 lbs (1814 kg).
| Engine Specs |
Engine Model ...................... Shibaura N844LT
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 135 (2.216)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 60.0 (45.0)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 173 (128)
Torque Speed, rpm ...................... 1500
Fast Idle Speed, rpm ...................... 3130-3180
Low Idle Speed, rpm ...................... 1150-1250
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Tank Capacity, gal (L) ...................... 16.3 (61.7)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 80 HD roller chains
Drive Motor Type ...................... Radial piston
Tire Size (Std) ...................... 12x16.5 HD
Tire Size (Opt) ...................... 33x15.5-12
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Travel Speed (Std), mph (kph) ...................... 7.2 (11.6)
Travel Speed (Opt), mph (kph) ...................... 10.1 (16.2)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................17.2 (65.2)
Pump Flow (Opt), gpm (Lpm) ...................... 25.5 (96.6)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, qts (L) ...................... 15.7 (14.8)
Hydraulic System Capacity, gal (L) ...................... 8.6 (32.6)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2000 (907)
Tipping Load, lbs (kg) ...................... 4000 (1814)
Boom Lifting Force, lbs (kg) ...................... 3000 (1360)
Bucket Breakout Force, lbs (kg) ...................... 4312 (1955)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42.5 (1080)
Height (Boom Raised), in (mm) ...................... 147.3 (3740)
Height (Operator Cab), in (mm) ...................... 77.1 (1975)
Length (w/o Bucket), in (mm) ...................... 104 (2640)
Length (Bucket On Ground), in (mm) ...................... 129.7 (3290)
Width (w/o Bucket), in (mm) ...................... 70.6 (1790)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 120.9 (3070)
Dump Angle At Max Height, deg ...................... 43
Dump Height (Fully Raised), in (mm) ...................... 95.6 (2425)
Dump Reach At Max Height, in (mm) ...................... 27.7 (705)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 9.5 (240)
Turning Radius (w/Bucket), in (mm) ...................... 70 (1780)
Shipping Weight, lbs (kg) ...................... 5700 (2590)
Operating Weight, lbs (kg) ...................... 6230 (2825)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |