Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LS190

New Holland LS190 Specifications

The New Holland LS190 skid steer loader driveline system components: a 304 cu.in (5L) New Holland 450/NC 4-cylinder naturally aspirated liquid-cooled diesel engine with a rated power of 75 hp (55.6 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 20 gal/min (75.7 l/min). The system relief pressure is 2600 psi (176 bar). The New Holland LS190 is equipped with 100 HD roller chains and 14x17.5 tires. The skid steer loader has a lift height of 124.1" (3150 mm) to hinge pin and dump height of 100.6" (2555 mm). The rated operating capacity is 2800 lbs (1270 kg), and tipping load is 5600 lbs (2540 kg).

Engine Specs

Engine Model ...................... New Holland 450/NC
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 304 (4.98)
Cylinder Bore, in (mm) ...................... 4.41 (112.0)
Piston Stroke, in (mm) ...................... 5.00 (127.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 75.0 (55.6)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 325 (240)
Torque Speed, rpm ...................... 1300
Fast Idle Speed, rpm ...................... 2325-2375
Low Idle Speed, rpm ...................... 1000-1050
Compression Ratio ...................... 17.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Valve Clearance (Intake), in (mm) ...................... 0.016 (0.41)
Valve Clearance (Exhaust), in (mm) ...................... 0.019 (0.48)
Fuel Tank Capacity, gal (L) ...................... 21.5 (81.4)
Oil Capacity, qts (L) ...................... 11.6 (10.9)
Coolant Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 45

Drive Train

Drive System Type ...................... Hydrostatic, chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 14x17.5
Tire Size (Opt) ...................... 12x16.5
Chaincase Capacity, qts (L) ...................... 12.0 (11.4)
Travel Speed (Std), mph (kph) ...................... 7.6 (12.2)
Travel Speed (Opt), mph (kph) ...................... 12.1 (19.3)

Hydraulic System

Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................20.0 (75.7)
Pump Flow (Opt), gpm (Lpm) ...................... 33.8 (127.9)
System Pressure, Bar (psi) ...................... 170-176 (2500-2600)
Hydraulic System Capacity, gal (L) ...................... 11.3 (42.6)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2800 (1270)
Tipping Load, lbs (kg) ...................... 5600 (2540)
Boom Lifting Force, lbs (kg) ...................... 5200 (2360)
Bucket Breakout Force, lbs (kg) ...................... 6035 (2735)

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 51.4 (1305)
Height (Boom Raised), in (mm) ...................... 150.6 (3825)
Height (Operator Cab), in (mm) ...................... 79.4 (2015)
Length (w/o Bucket), in (mm) ...................... 123.6 (3140)
Length (Bucket On Ground), in (mm) ...................... 147.3 (3740)
Width (w/o Bucket), in (mm) ...................... 76.1 (1935)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124.1 (3150)
Dump Angle At Max Height, deg ...................... 47
Dump Height (Fully Raised), in (mm) ...................... 100.6 (2555)
Dump Reach At Max Height, in (mm) ...................... 31.5 (800)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 74
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 9.9 (250)
Turning Radius (w/Bucket), in (mm) ...................... 83.7 (2125)
Operating Weight, lbs (kg) ...................... 7860 (3565)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS