____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L160 |
New Holland L160 Specifications
The
New Holland L160 skid steer loader driveline system components: a 121.7 cubic
inches (2L) Shibaura N844 four-cylinder indirect injection naturally aspirated
diesel engine with a rated power of 46 hp (34 kW), and one-speed hydrostatic
transmission. The hydraulic system has a pump with a rated capacity of 15.1
gal/min (57.2 l/min). The system relief pressure is 2500 psi (172 bar). The New
Holland L160 is equipped with 80 HD roller chains and 10x16.5 tires. The skid
steer loader has a lift height of 118" (2995 mm) to hinge pin and dump height of
93.3" (2370 mm). The rated operating capacity is 1600 lbs (726 kg), and tipping
load is 3200 lbs (1450 kg).
| Engine Specs |
Engine Model ...................... Shibaura N844
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 121.7 (1.995)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2900
Maximum Torque, Nm (lb-ft) ...................... 137 (101)
Torque Speed, rpm ...................... 1700
Fast Idle Speed, rpm ...................... 3100-3180
Low Idle Speed, rpm ...................... 1030-1130
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Valve Clearance, in (mm) ...................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) ...................... 14.4 (54.5)
Oil Capacity, qts (L) ...................... 6.9 (6.5)
Coolant Capacity, qts (L) ...................... 10.8 (10.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 10x16.5 HD
Tire Size (Opt) ...................... 31x15.5-12
Chaincase Capacity, qts (L) ...................... 13.1 (12.3)
Forward Speed, mph (kph) ...................... 7.3 (11.8)
Reverse Speed, mph (kph) ...................... 7.3 (11.8)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ......................15.1 (57.2)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, qts (L) ...................... 15.7 (14.8)
Hydraulic System Capacity, gal (L) ...................... 8.6 (32.6)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1600 (726)
Tipping Load, lbs (kg) ...................... 3200 (1450)
Boom Lifting Force, lbs (kg) ...................... 2828 (1285)
Bucket Breakout Force, lbs (kg) ...................... 3712 (1687)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 42.5 (1080)
Height (Boom Raised), in (mm) ...................... 143.8 (3650)
Height (Operator Cab), in (mm) ...................... 76.2 (1935)
Length (w/o Bucket), in (mm) ...................... 104 (2640)
Length (Bucket On Ground), in (mm) ...................... 127.6 (3240)
Width (w/o Bucket), in (mm) ...................... 63.9 (1625)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 118 (2995)
Dump Angle At Max Height, deg ...................... 44
Dump Height (Fully Raised), in (mm) ...................... 93.3 (2370)
Dump Reach At Max Height, in (mm) ...................... 27.9 (710)
Rollback Angle At Ground Level, deg ...................... 35
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 60 (1525)
Ground Clearance, in (mm) ...................... 8.6 (220)
Turning Radius (w/Bucket), in (mm) ...................... 70 (1780)
Shipping Weight, lbs (kg) ...................... 4880 (2218)
Operating Weight, lbs (kg) ...................... 5535 (2510)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |