____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L185 |
New Holland L185 Specifications
The
New Holland L185 skid steer loader is powered by 195 cu.in (3.2L) FPT F5C E5454
four-cycle four-cylinder turbocharged liquid-cooled diesel engine with a rated
power of 77 hp (57 kW) at 2500 rpm. The New Holland L185 is equipped with a
single-speed or two-speed transmission, 100 HD roller chains, and 12x16.5
standard tires. The hydraulic system has a pump with fluid flow rate of 21 gpm
(79.6 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer loader
has a rated operating capacity of 2500 lbs (1135 kg) and tipping load of 5000
lbs (2268 kg). The lift height is 126.8 inches (3220 mm) to hinge pin, and dump
height is 101.2 inches (2570 mm).
| Engine Specs |
Engine Model ...................... FPT F5C E5454
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 195 (3.19)
Cylinder Bore, in (mm) ...................... 3.89 (99.0)
Piston Stroke, in (mm) ...................... 4.09 (104.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 77.0 (57.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 310 (229)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2600-2750
Low Idle Speed, rpm ...................... 1075-1175
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 22.9 (86.7)
Oil Capacity, qts (L) ...................... 9.0 (8.5)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 12x16.5 HD
Tire Size (Opt) ...................... 33x15.5-12
Chaincase Capacity, qts (L) ...................... 6.8 (6.4)
Travel Speed (Std), mph (kph) ...................... 7.0 (11.2)
Travel Speed (Opt), mph (kph) ...................... 11.3 (18.2)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................21.0 (79.6)
Pump Flow (Opt), gpm (Lpm) ...................... 35.8 (135.7)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, qts (L) ...................... 20.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2500 (1135)
Tipping Load, lbs (kg) ...................... 5000 (2268)
Boom Lifting Force, lbs (kg) ...................... 4835 (2195)
Bucket Breakout Force, lbs (kg) ...................... 7670 (3480)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Boom Raised), in (mm) ...................... 152 (3860)
Height (Operator Cab), in (mm) ...................... 78.7 (2000)
Length (w/o Bucket), in (mm) ...................... 112 (2845)
Length (Bucket On Ground), in (mm) ...................... 141.2 (3585)
Width (w/o Bucket), in (mm) ...................... 71.3 (1810)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 126.8 (3220)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 101.2 (2570)
Dump Reach At Max Height, in (mm) ...................... 33.1 (840)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.9 (225)
Turning Radius (w/Bucket), in (mm) ...................... 78 (1980)
Shipping Weight, lbs (kg) ...................... 6485 (2950)
Operating Weight, lbs (kg) ...................... 7135 (3240)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |