____________________________________________________________________________________

Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L150

New Holland L150 Maintenance

The New Holland L150 skid steer loader is powered by 91.3 cubic inches (1.5 L) Shibaura N843H three-cylinder indirect injection liquid-cooled diesel engine with a rated power of 38 hp (28.3 kW) at 3200 rpm. The New Holland L150 is equipped with a single-speed hydrostatic transmission, 50/80 HD roller chains, and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 11.6 gpm (44 lpm). The hydraulic pressure is 2500 psi (172 bar). The skid steer loader has a rated operating capacity of 1350 lbs (612 kg) and tipping load of 2700 lbs (1225 kg). The lift height is 115.8 inches (2940 mm) to hinge pin, and dump height is 92.2 inches (2340 mm).

Refill Capacities

Engine Oil Capacity, gal (L) ...................... 1.45 (5.5)
Engine Coolant Capacity, gal (L) ...................... 2.45 (9.3)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 1.5 (5.7)
Hydraulic System Fluid Capacity, gal (L) ...................... 5.0 (18.9)
Chain Case Oil Capacity, gal (L) ...................... 1.5 (5.7)

Recommended Oil and Fluid

Engine Oil Type ...................... SAE 10W-30, SAE 15W-40. API Service Category SH-CG4
Engine Coolant Type ...................... Antitreeze/Water 50/50 Mixture (Ethylene Glycol)
Hydraulic Fluid Type ...................... SAE 10W-30, 20W-30. API Service Category SH-CG4
Chain Case Oil Type ...................... SAE 10W-30, 20W-30. API Service Category SH-CG4

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Chain Case Oil Level ...................... Every 50 Hours
Check Hydraulic Fluid Level ...................... Every 50 Hours
Check Alternator Belt ...................... Every 200 Hours
Check Drive Chain Tension ...................... Every 200 Hours
Check Battery ...................... Every 200 Hours
Change Engine Oil ...................... Every 200 Hours
Replace Engine Oil Filter ...................... Every 200 Hours
Replace Fuel Filter ...................... Every 200 Hours
Replace Primary Engine Air Filter ...................... Every 200 Hours
Replace Secondary Engine Air Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Replace Hydraulic Reservoir Breather Cap ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 2000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 84475542/86546618
Engine Fuel Filter. Part Number ...................... 87036044 and 9611973
Primary Engine Air Filter. Part Number ...................... 87704241
Secondary Engine Air Filter. Part Number ...................... 86504143
Hydraulic Reservoir Breather Cap. Part Number ...................... 86628700
Hydraulic Oil Filter. Part Number ...................... 9842392

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS