Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat S150 |
Bobcat S150 Specifications
The Bobcat S150 skid steer loader driveline system components: a 134.1 cu.in (2.2L) Kubota V2203 M-DI-E2B 4-cylinder direct injection naturally aspirated diesel engine with a rated power of 46 hp (34.3 kW), and hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 16.6 gal/min (63 l/min). The system relief pressure is 3300 psi (228 bar). The Bobcat S150 is equipped with wet disc brakes and 10x16.5-10 tires. The skid steer loader has a boom lifting force of 4350 lbs (1975 kg) and bucket breakout force of 3600 lbs (1635 kg). The rated operating capacity is 700 lbs (318 kg), and tipping load is 1400 lbs (636 kg).
Engine Specs |
Engine Model ...................... Kubota V2203 M-DI-E2B
Engine Type ...................... Vertical water-cooled 4-cylinder diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.3)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 141 (104.5)
Torque Speed, rpm ...................... 1700
Idle Speed, rpm ...................... 1075-3000
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication with filter
Combustion Chamber ...................... Spherical type (E-TVCS)
Fuel Tank Capacity, gal (L) ...................... 23.0 (87.1)
Oil Capacity, qts (L) ...................... 7.5 (7.1)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
Drive Train |
Drive System Type ...................... Fully hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80 HSOC continuous roller chain
Brakes Type ...................... Independent wet disc
Tire Size (Std) ...................... 10x16.5-10
Tire Size (Opt) ...................... 31.5x13.0-16.5
Chaincase Capacity, qts (L) ...................... 36.1 (34.0)
Forward Speed, mph (kph) ...................... 7.1 (11.3)
Reverse Speed, mph (kph) ...................... 7.1 (11.3)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ...................... 16.6 (63.0)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, qts (L) ...................... 19.3 (18.2)
Hydraulic System Capacity, gal (L) ...................... 8.5 (32.2)
Number of Valves ...................... 3
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 700 (318)
Tipping Load, lbs (kg) ...................... 1400 (636)
Boom Lifting Force, lbs (kg) ...................... 4350 (1975)
Bucket Breakout Force, lbs (kg) ...................... 3600 (1635)
Dimensions and Weight |
Wheelbase, in (mm) ...................... 40.5 (1030)
Height (Operator Cab), in (mm) ...................... 76.3 (1940)
Height (Boom Raised), in (mm) ...................... 148 (3760)
Length (w/o Bucket), in (mm) ...................... 101.7 (2585)
Length (Bucket On Ground), in (mm) ...................... 130.3 (3310)
Width (w/o Bucket), in (mm) ...................... 66 (1675)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2905)
Dump Angle At Max Height, deg ...................... 44
Dump Height (Fully Raised), in (mm) ...................... 86.5 (2195)
Dump Reach At Max Height, in (mm) ...................... 18.1 (460)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 92
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (w/Bucket), in (mm) ...................... 82.4 (2090)
Shipping Weight, lbs (kg) ...................... 5335 (2425)
Operating Weight, lbs (kg) ...................... 5755 (2615)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |