____________________________________________________________________________________
| Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 330G |
John Deere 330G Specifications
The
John Deere 330G skid steer loader is powered by 186.3 cu.in (3.1L) Yanmar
4TNV94FHT vertical inline four-cylinder turbocharged intercooled diesel engine with a rated
power of 91.2 hp (68 kW) at 2500 rpm. The John Deere 330G is equipped with a
two-speed transmission, hydraulic wet disc brakes, and 14x17.5 standard
tires. The hydraulic system has a pump with fluid flow rate of 23.5 gpm (89
lpm). The hydraulic pressure is 3450 psi (238 bar).
The skid steer loader has a rated
operating capacity of 3000 lbs (1362 kg) and tipping load of 6000 lbs (2724 kg).
The boom lifting force is 7000 lbs (3175 kg), and bucket breakout force is 9350
lbs (4241 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV94FHT
Engine Type ...................... Vertical in-line 4-cycle 4-cylinder turbocharged diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 186.3 (3.06)
Cylinder Bore, in (mm) ...................... 3.70 (94.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged, intercooled
Rated Engine Power, hp (kW) ...................... 91.2 (68.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 382.0 (281.8)
Torque Speed, rpm ...................... 1700
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Lubrication System ...................... Forced lubrication with trochoid pump
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Oil Capacity, qts (L) ...................... 10.8 (10.2)
Coolant Capacity, qts (L) ...................... 15.9 (15.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
| Drive Train |
Drive System Type ...................... 4-wheel drive, hydrostatic with electro-hydraulic controls
Number of Gears ...................... 2 (low/high)
Chain Drive Type ...................... 100 HD continuous loop
Brakes Type ...................... Hydraulic wet disc
Front Tire Size ...................... 14x17.5
Rear Tire Size ...................... 14x17.5
Chain Case Capacity (Each), qts (L) ...................... 22.3 (21.0)
Forward Speed (Low range), mph (kph) ...................... 7.0 (11.3)
Reverse Speed (Low range), mph (kph) ...................... 7.0 (11.3)
Forward Speed (High range), mph (kph) ...................... 12.0 (19.3)
Reverse Speed (High range), mph (kph) ...................... 12.0 (19.3)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow (Std), gpm (Lpm) ...................... 23.5 (89.0)
Pump Flow (Opt), gpm (Lpm) ...................... 36.5 (138.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Capacity, gal (L) ...................... 8.7 (33.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 3000 (1362)
Tipping Load, lbs (kg) ...................... 6000 (2724)
Boom Lifting Force, lbs (kg) ...................... 7000 (3175)
Bucket Breakout Force, lbs (kg) ...................... 9350 (4240)
| Dimensions and Weight |
Wheelbase, in (mm) ...................... 49.9 (1265)
Height (Operator Cab), in (mm) ...................... 86.3 (2190)
Length (w/o Bucket), in (mm) ...................... 122 (3100)
Length (Bucket On Ground), in (mm) ...................... 146 (3705)
Width (w/o Bucket), in (mm) ...................... 78 (1980)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 132 (3350)
Dump Angle At Max Height, deg ...................... 48
Dump Height (Fully Raised), in (mm) ...................... 106.1 (2695)
Dump Reach At Max Height, in (mm) ...................... 28 (710)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 9.7 (245)
Turning Radius (w/Bucket), in (mm) ...................... 85.7 (2175)
Operating Weight, lbs (kg) ...................... 9900 (4495)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |