____________________________________________________________________________________
Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 326E |
John Deere 326E Maintenance
The John Deere 326E skid steer loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98CT 4-cylinder turbocharged intercooled diesel engine with a rated power of 70 hp (52.5 kW) at 2500 rpm. The John Deere 326E is equipped with a vertical-lift loader boom, one-speed or two-speed hydrostatic transmission, 100HD drive chains, and 12.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 21 gpm (79.6 lpm) or 29 gpm (109.9 lpm). The skid steer loader has a rated operating capacity of 2690 lbs (1220 kg) and tipping load of 5380 lbs (2445 kg). The lift height is 125.4" (3185 mm) to hinge pin, and dump height is 99.9" (2535 mm).
Refill Capacities |
Fuel Tank Capacity, gal (L) ...................... 24.0 (91.0)
Engine Oil Capacity, gal (L) ...................... 2.7 (10.2)
Engine Coolant Capacity, gal (L) ...................... 3.4 (13.0)
Hydraulic Fluid Capacity, gal (L) ...................... 7.0 (26.5)
Recommended Oil and Fluid |
Engine Oil Type ...................... Plus 50, SAE 10W-30, SAE 10W-40, SAE 15W-40. API Service CJ-4, CK-4
Engine Coolant Type ...................... John Deere Cool-Gard II or Cool-Gard II PG
Hydraulic Fluid Type ...................... John Deere Plus-50, Hydrau, Hydrau XR, Hydrau-Gard
Chain Case Oil Type ...................... John Deere Plus-50, Hy-Gard, Torq-Gard
Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check And Adjust Drive Belt Tension ...................... Every 100 Hours
Clean Primary Air Filter ...................... Every 250 Hours
Clean Fuel Filter ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Drain Water And Sediment From Fuel Tank ...................... Every 500 Hours
Replace Primary Engine Air Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Check Chain Case Oil Level ...................... Every 500 Hours
Check Engine Coolant ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Cab Fresh Air Filter (if equipped) ...................... Every 1000 Hours
Replace Cab Recirculation Air Filter (if equipped) ...................... Every 1000 Hours
Replace Hydraulic Oil Reservoir Breather ...................... Every 1000 Hours
Replace Fuel Tank Breather ...................... Every 1000 Hours
Check And Adjust Engine Valve Lash ...................... Every 1500 Hours
Service And Refill Cooling System ...................... Every 3000 Hours
Replacement Parts |
Engine Oil Filter. Part Number ...................... MIU800650
Primary Fuel Filter. Part Number ...................... MIU801025
Final Fuel Filter. Part Number ...................... MIU801090
Primary Engine Air Filter. Part Number ...................... AT396132
Secondary Engine Air Filter. Part Number ...................... AT332909
Hydraulic Oil Filter. Part Number ...................... AT435649
Hydraulic Oil Tank Breather. Part Number ...................... AT101565
____________________________________________________________________________________
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |