____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2032 |
Mustang 2032 Specifications
The
Mustang 2032 skid steer loader is powered by 100.2 cu.in (1.64L) Yanmar 3TNV88
4-cycle 3-cylinder direct injection naturally aspirated liquid-cooled diesel
engine with a rated power of 36 hp (27 kW) at 3000 rpm. The Mustang 2032 is
equipped with a radial-lift loader boom, single-speed hydrostatic transmission,
80K drive chains, and 27x10.5x15 (Std) or 10.0x16.5 (Opt) tires. The hydraulic
system has a pump with fluid flow rate of 14.5 gpm (54.5 lpm). The skid steer
loader has a rated operating capacity of 1250 lbs (567 kg) and tipping load of
2500 lbs (1135 kg). The lift height is 110 inches (2795 mm) to hinge pin, and
dump height is 86.5 inches (2195 mm).
| Engine Specs |
Engine Model ...................... Yanmar 3TNV88
Engine Type ...................... 4-cycle 3-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... Three
Engine Bore, in (mm) ...................... 3.47 (88.0)
Engine Stroke, in (mm) ...................... 3.54 (90.0)
Displacement, cu.in (L) ...................... 100.2 (1.64)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 36.0 (27.0)
Rated Engine Speed, rpm ...................... 3000
Idle Speed, rpm ...................... 1100-3100
Maximum Torque, Nm (lb-ft) ...................... 104 (77)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 19.1:1
Firing Order ...................... 1-3-2
Direction of Rotation ...................... Counterclockwise (flywheel side)
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical, in-line type
Fuel Filter Type ...................... Single element
Air Cleaner Type ...................... Dual dry element
Lubricating System ...................... Forced lubrication with trochoid pump
Oil Filter Type ...................... Spin on type
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Interim Tier 3
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 10.4 (39.5)
Engine Oil capacity, qts (L) ...................... 7.6 (7.2)
Coolant Capacity, qts (L) ...................... 6.3 (6.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size (Std) ...................... 27x10.5x15
Rear Tire Size (Std) ...................... 27x10.5x15
Front Tire Size (Opt) ...................... 10.0x16.5
Rear Tire Size (Opt) ...................... 10.0x16.5
Chaincase Capacity, qts (L) ...................... 20.0 (19.0)
Maximum Speed, mph (km/h) ...................... 7.0 (11.3)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 14.5 (54.5)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1250 (567)
Tipping Load, lbs (kg) ...................... 2500 (1135)
Breakout Force (Tilt), lbs (kg) ...................... 2800 (1270)
Breakout Force (Lift), lbs (kg) ...................... 2450 (1114)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 36.3 (920)
Height (Operator Cab), in (mm) ...................... 72.3 (1835)
Height (Boom Raised), in (mm) ...................... 141.1 (3585)
Length (w/o Bucket), in (mm) ...................... 90 (2285)
Length (Bucket On Ground), in (mm) ...................... 115.5 (2935)
Width (27x10.5x15 tires, w/o Bucket), in (mm) ...................... 52.4 (1330)
Width (10.0x16.5 tires, w/o Bucket), in (mm) ...................... 51.9 (1320)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 110 (2795)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 86.5 (2195)
Dump Reach At Max Height, in (mm) ...................... 20.8 (530)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 55 (1405)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 69 (1755)
Turning Radius (Front w/o Bucket), in (mm) ...................... 43.2 (1095)
Turning Radius (Rear), in (mm) ...................... 53.8 (1365)
Operating Weight, lbs (kg) ...................... 4600 (2085)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |