____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 216B2 |
Caterpillar 216B2 Specifications
The
Cat 216B2 skid steer loader is powered by 134.1 cu.in (2.2L) Caterpillar C2.2
four-cylinder direct injection naturally aspirated diesel engine with a rated
power of 48 hp (35 kW) at 3000 rpm. The Cat 216B2 is equipped with a
single-speed hydrostatic transmission, radial-lift loader boom, 80HS continuous
roller chains, and 10x16.5 tires. The hydraulic system has a pump with fluid
flow rate of 15.6 gpm (60 lpm). The hydraulic pressure is 3335 psi (230 bar).
The skid steer loader has a rated operating capacity of 1400 lbs (635 kg) and
tipping load of 2800 lbs (1270 kg). The boom lifting force is 3168 lbs (1437
kg), and bucket breakout force is 3747 lbs (1700 kg).
| Engine Specs |
Engine Model .................... Caterpillar C2.2
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 134.1 (2.19)
Cylinder Bore, in (mm) .................... 3.31 (84.0)
Piston Stroke, in (mm) .................... 3.94 (100.0)
Aspiration .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 48.0 (35.0)
Maximum Engine Power, hp (kW) .................... 51.0 (38.0)
Rated Engine Speed, rpm .................... 3000
Compression Ratio .................... 23.3:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Valve Lash, in (mm) .................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) .................... 15.4 (58.0)
Oil Capacity, qts (L) .................... 10.6 (10.0)
Coolant Capacity, qts (L) .................... 10.6 (10.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 65
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel chain drive
Number of Gears .................... Single
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 10x16.5
Rear Tire Size .................... 10x16.5
Chaincase Capacity, qts (L) .................... 6.4 (6.0)
Forward Speed, mph (kph) .................... 7.9 (12.7)
Reverse Speed, mph (kph) .................... 7.9 (12.7)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow, gpm (Lpm) .................... 15.6 (60.0)
System Pressure, Bar (psi) .................... 230 (3335)
Hydraulic Tank Capacity, gal (L) .................... 9.2 (35.0)
Hydraulic System Capacity, gal (L) .................... 14.5 (55.0)
Number of Valves .................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 1400 (635)
Tipping Load, lbs (kg) .................... 2800 (1270)
Boom Lifting Force, lbs (kg) .................... 3168 (1437)
Bucket Breakout Force, lbs (kg) .................... 3747 (1700)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 39 (990)
Height (Operator Cab), in (mm) .................... 77.4 (1965)
Height (Boom Raised), in (mm) .................... 146 (3710)
Length (w/o Bucket), in (mm) .................... 99.2 (2520)
Length (Bucket On Ground), in (mm) .................... 127.4 (3235)
Width (w/o Bucket), in (mm) .................... 60 (1520)
Height to Hinge Pin (Fully Raised), in (mm) .................... 112.4 (2855)
Height to Hinge Pin (Carry Position), in (mm) .................... 9.4 (240)
Dump Angle At Max Height, deg .................... 40
Dump Height (Fully Raised), in (mm) .................... 85.4 (2170)
Dump Reach At Max Height, in (mm) .................... 20 (505)
Rollback Angle At Max Height, deg .................... 96.7
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 60 (1520)
Ground Clearance, in (mm) .................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) .................... 76.4 (1940)
Shipping Weight, lbs (kg) .................... 5100 (2320)
Operating Weight, lbs (kg) .................... 5675 (2580)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |