____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 216B2 |
Caterpillar 216B2 Maintenance
The
Cat 216B2 skid steer loader is powered by 134.1 cu.in (2.2L) Caterpillar C2.2
four-cylinder direct injection naturally aspirated diesel engine with a rated
power of 48 hp (35 kW) at 3000 rpm. The Cat 216B2 is equipped with a
single-speed hydrostatic transmission, radial-lift loader boom, 80HS continuous
roller chains, and 10x16.5 tires. The hydraulic system has a pump with fluid
flow rate of 15.6 gpm (60 lpm). The hydraulic pressure is 3335 psi (230 bar).
The skid steer loader has a rated operating capacity of 1400 lbs (635 kg) and
tipping load of 2800 lbs (1270 kg). The boom lifting force is 3168 lbs (1437
kg), and bucket breakout force is 3747 lbs (1700 kg).
| Refill Capacities |
Engine Oil Capacity, gal (L) .................... 2.6 (10.0)
Engine Coolant Capacity, gal (L) .................... 2.6 (10.0)
Hydraulic Tank Fluid Capacity, gal (L) .................... 9.2 (35.0)
Hydraulic System Fluid Capacity, gal (L) .................... 14.5 (55.0)
Chain Case Oil Capacity, gal (L) .................... 1.6 (6.0)
| Recommended Oil and Fluid |
Engine Oil Type .................... Cat DEO-ULS, SAE 10W-30, 15W-40. API Service CE, CF-4, CG-4, CH-4
Engine Coolant Type .................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type .................... Cat HYDO Advanced, Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type .................... Cat DEO-ULS, SAE 15W-40, 5W-40
| Service Intervals |
Lubricate Cylinder Pivot Points .................... Every 100 Hours
Check and Adjust Alternator/Fan Belt .................... Every 250 Hours
Clean Cab Air Filters .................... Every 250 Hours
Clean Primary Engine Air Filter .................... Every 250 Hours
Check and Adjust Drive Chain .................... Every 250 Hours
Change Engine Oil .................... Every 500 Hours
Replace Engine Oil Filter .................... Every 500 Hours
Replace Primary Fuel Filter .................... Every 500 Hours
Replace Final Fuel Filter .................... Every 500 Hours
Replace Primary Engine Air Filter .................... Every 500 Hours
Replace Secondary Engine Air Filter .................... Every 500 Hours
Replace Hydraulic Tank Breather .................... Every 500 Hours
Replace Cab Air Filters .................... Every 500 Hours
Check Chain Case Oil Level .................... Every 500 Hours
Change Chain Case Oil .................... Every 1000 Hours
Change Hydraulic Fluid .................... Every 1000 Hours
Replace Hydraulic Oil Filter .................... Every 1000 Hours
Replace Alternator/Fan Belt .................... Every 1000 Hours
Service And Refill Cooling System .................... Every 3000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number .................... 220-1523
Fuel Water Separator. Part Number .................... 156-1200
In-line Fuel Filter. Part Number .................... 1G-7206, 3I-1083
Primary Engine Air Filter. Part Number .................... 231-0167, 154-7108
Secondary Engine Air Filter. Part Number .................... 231-0168
Cab Air Filter. Part Number .................... 231-8130, 231-8132
Hydraulic Oil Filter. Part Number .................... 1G-8878
Hydraulic Tank Breather. Part Number .................... 207-9729
Alternator/Fan Belt. Part Number .................... 438-1597
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |