____________________________________________________________________________________

Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LX865

New Holland LX865 Specifications

The New Holland LX865 skid steer loader is powered by 192 cu.in (3.2L) New Holland 332T 3-cylinder turbocharged water-cooled diesel engine with a rated power of 60 hp (44.5 kW) at 2100 rpm. The New Holland LX865 is equipped with a radial-lift loader boom, 1-speed hydrostatic transmission, ASA 100 drive chains, and 12x16.5 or 8.25x15 tires. The hydraulic system has a pump with fluid flow rate of 17.6 gpm (66.7 lpm) or 31 gpm (117.5 lpm). The skid steer loader has a rated operating capacity of 2200 lbs (998 kg) and tipping load of 4400 lbs (2000 kg). The lift height is 125.4 inches (3185 mm) to hinge pin, and dump height is 100.5 inches (2555 mm).

Engine Specs

Engine Model ...................... New Holland 332T
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 192 (3.15)
Cylinder Bore, in (mm) ...................... 4.4 (112.0)
Piston Stroke, in (mm) ...................... 4.2 (106.7)
Rated Engine Power, hp (kW) ...................... 60.0 (44.5)
Rated Engine Speed, rpm ...................... 2100
Maximum Torque, Nm (lb-ft) ...................... 250 (185)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2275
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 18.8 (71.2)
Engine Oil Capacity, qts (L) ...................... 7.0 (6.6)
Coolant Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 45

Drive Train

Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 100 roller chain
Front Tire Size (Std) ...................... 12.00x16.5
Rear Tire Size (Std) ...................... 12.00x16.5
Front Tire Size (Opt) ...................... 8.25x15
Rear Tire Size (Opt) ...................... 8.25x15
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 7.6 (12.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 17.6 (66.7)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 31.0 (117.5)
System Pressure, Bar (psi) ...................... 176 (2600)
Hydraulic System Capacity, gal (L) ...................... 6.5 (25.5)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 4400 (2000)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 48 (1220)
Height (Operator Cab), in (mm) ...................... 78 (1980)
Height (Boom Raised), in (mm) ...................... 150 (3810)
Length (w/o Bucket), in (mm) ...................... 115.3 (2925)
Length (Bucket On Ground), in (mm) ...................... 140.1 (3560)
Width (w/o Bucket), in (mm) ...................... 58.5 (1485)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 125.4 (3185)
Dump Angle At Max Height, deg ...................... 47
Dump Height (Fully Raised), in (mm) ...................... 100.5 (2555)
Dump Reach At Max Height, in (mm) ...................... 31.3 (795)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 74
Departure Angle, deg ...................... 24
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (Front), in (mm) ...................... 82.8 (2100)
Turning Radius (Rear), in (mm) ...................... 69.3 (1760)
Operating Weight, lbs (kg) ...................... 6985 (3170)

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS