____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LS180 |
New Holland LS180 Specifications
The
New Holland LS180 skid steer loader is powered by 192 cubic inches (3.2L) CNH
332T/JF 3-cylinder direct injection turbocharged diesel engine with a rated
power of 60 hp (44.5 kW) at 2200 rpm. The New Holland LS180 is equipped with a
single-speed or two-speed transmission, 100 HD roller chains, and 12x16.5 R4
standard tires. The hydraulic system has a pump with fluid flow rate of 18.5 gpm
(70.1 lpm). The hydraulic pressure is 2600 psi (176 bar). The skid steer loader
has a rated operating capacity of 2400 lbs (1090 kg) and tipping load of 4800
lbs (2180 kg). The lift height is 124.6 inches (3165 mm) to hinge pin, and dump
height is 100 inches (2540 mm).
| Engine Specs |
Engine Model ...................... CNH 332T/JF
Engine Type ...................... 4-cycle vertical liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 192 (3.15)
Cylinder Bore, in (mm) ...................... 4.41 (112.0)
Piston Stroke, in (mm) ...................... 4.20 (106.7)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 60.0 (44.5)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 253 (187)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2350-2400
Low Idle Speed, rpm ...................... 1000-1050
Compression Ratio ...................... 17.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Valve Clearance (Intake), in (mm) ...................... 0.015-0.017 (0.38-0.43)
Valve Clearance (Exhaust), in (mm) ...................... 0.017-0.021 (0.43-0.53)
Fuel Tank Capacity, gal (L) ...................... 18.0 (68.0)
Oil Capacity, qts (L) ...................... 7.1 (6.6)
Coolant Capacity, qts (L) ...................... 15.5 (14.7)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 45
| Drive Train |
Drive System Type ...................... Hydrostatic, chain drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (high/low)
Chain Drive Type ...................... 100 HD roller chains
Drive Motor Type ...................... Axial piston
Tire Size (Std) ...................... 12x16.5 R4
Tire Size (Opt) ...................... 12x16.5 HD
Chaincase Capacity, qts (L) ...................... 9.6 (9.1)
Travel Speed (Std), mph (kph) ...................... 7.2 (11.6)
Travel Speed (Opt), mph (kph) ...................... 11.4 (18.3)
| Hydraulic System |
Hydraulic System Type ...................... Open Center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ......................18.5 (70.1)
Pump Flow (Opt), gpm (Lpm) ...................... 32.3 (122.4)
System Pressure, Bar (psi) ...................... 170-176 (2500-2600)
Hydraulic System Capacity, gal (L) ...................... 11.3 (42.6)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2400 (1090)
Tipping Load, lbs (kg) ...................... 4800 (2180)
Boom Lifting Force, lbs (kg) ...................... 3975 (1805)
Bucket Breakout Force, lbs (kg) ...................... 6035 (2735)
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 47.8 (1215)
Height (Boom Raised), in (mm) ...................... 150.9 (3830)
Height (Operator Cab), in (mm) ...................... 77 (1955)
Length (w/o Bucket), in (mm) ...................... 116.1 (2950)
Length (Bucket On Ground), in (mm) ...................... 141 (3580)
Width (w/o Bucket), in (mm) ...................... 71.1 (1820)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124.6 (3165)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 100 (2540)
Dump Reach At Max Height, in (mm) ...................... 32.5 (825)
Rollback Angle At Ground Level, deg ...................... 37
Rollback Angle At Max Height, deg ...................... 75
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (w/Bucket), in (mm) ...................... 82.7 (2100)
Operating Weight (Single speed), lbs (kg) ...................... 7192 (3270)
Operating Weight (Two speed), lbs (kg) ...................... 7223 (3285)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |