Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland LS180

New Holland LS180 Maintenance

The New Holland LS180 skid steer loader is powered by 192 cubic inches (3.2L) CNH 332T/JF 3-cylinder direct injection turbocharged diesel engine with a rated power of 60 hp (44.5 kW) at 2200 rpm. The New Holland LS180 is equipped with a single-speed or two-speed transmission, 100 HD roller chains, and 12x16.5 R4 standard tires. The hydraulic system has a pump with fluid flow rate of 18.5 gpm (70.1 lpm). The hydraulic pressure is 2600 psi (176 bar). The skid steer loader has a rated operating capacity of 2400 lbs (1090 kg) and tipping load of 4800 lbs (2180 kg). The lift height is 124.6 inches (3165 mm) to hinge pin, and dump height is 100 inches (2540 mm).

Refill Capacities

Engine Oil Capacity, gal (L) ...................... 1.75 (6.6)
Engine Coolant Capacity, gal (L) ...................... 3.9 (14.7)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 6.5 (24.6)
Hydraulic System Fluid Capacity, gal (L) ...................... 11.3 (42.6)
Chain Case Oil Capacity, gal (L) ...................... 2.4 (9.1)

Recommended Oil and Fluid

Engine Oil Type ...................... SAE 10W-30, SAE 15W-40. API Service Category SH-CG4
Engine Coolant Type ...................... Antitreeze/Water 50/50 Mixture (Ethylene Glycol)
Hydraulic Fluid Type ...................... SAE 10W-30. API Service Category SH-CG4
Chain Case Oil Type ...................... SAE 80W-90. API Service Category GL-5 Gear Oil

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Chain Case Oil Level ...................... Every 50 Hours
Check Hydraulic Fluid Level ...................... Every 50 Hours
Check Alternator Belt ...................... Every 200 Hours
Check Drive Chain Tension ...................... Every 200 Hours
Check Battery ...................... Every 300 Hours
Change Engine Oil ...................... Every 300 Hours
Replace Engine Oil Filter ...................... Every 300 Hours
Replace Fuel Filter ...................... Every 300 Hours
Replace Primary Engine Air Filter ...................... Every 600 Hours
Replace Secondary Engine Air Filter ...................... Every 600 Hours
Replace Hydraulic Oil Filter ...................... Every 600 Hours
Replace Hydraulic Reservoir Breather Cap ...................... Every 600 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 2000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 87800083
Engine Fuel Filter. Part Number ...................... 87801434
Primary Engine Air Filter. Part Number ...................... 86555826
Secondary Engine Air Filter. Part Number ...................... 86555827
Hydraulic Reservoir Breather Cap. Part Number ...................... 86628700
Hydraulic Oil Filter (Standard Flow). Part Number ...................... 9842392
Hydraulic Oil Filter (High Flow). Part Number ...................... 84475949

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS