____________________________________________________________________________________
| Home / Skid Steer Loaders / New Holland Skid Steer Loaders / New Holland L213 |
New Holland L213 Specifications
The
New Holland L213 skid steer loader is powered by 133.8 cu.in (2.2L) Shibaura
N844L four-cylinder vertical in-line water-cooled diesel engine with a rated
power of 46 hp (34 kW) at 2800 rpm. The New Holland L213 is equipped with a
radial-lift loader boom, 1-speed hydrostatic transmission, ASA 80 drive chains,
and 10x16.5 standard tires. The hydraulic system has a pump with fluid flow rate
of 15.6 gpm (59 lpm). The hydraulic pressure is 3045 psi (210 bar). The skid
steer loader has a rated operating capacity of 1300 lbs (590 kg) and tipping
load of 2600 lbs (1180 kg). The lift height is 112 inches (2845 mm) to hinge
pin, and dump height is 88.4 inches (2245 mm).
| Engine Specs |
Engine Model ...................... ISM Shibaura N844L
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.8 (2.22)
Cylinder Bore, in (mm) ...................... 3.31 (84.0)
Piston Stroke, in (mm) ...................... 3.94 (100.0)
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 143 (106)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1050-3150
Aspiration Type ...................... Naturally aspirated
Compression Ratio ...................... 22.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... In-line strainer
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ...................... 16.0 (60.5)
Engine Oil Capacity, qts (L) ...................... 7.9 (7.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... ASA 80 roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 6.6 (6.3)
Maximum Speed, mph (km/h) ...................... 7.9 (12.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 15.6 (59.0)
System Pressure, Bar (psi) ...................... 210 (3045)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.0 (15.1)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Breakout force (Lift), lbs (kg) ...................... 2915 (1325)
Breakout force (Tilt), lbs (kg) ...................... 4180 (1900)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37 (940)
Height (Operator Cab), in (mm) ...................... 75.5 (1920)
Height (Boom Raised), in (mm) ...................... 141.3 (3590)
Length (w/o Bucket), in (mm) ...................... 95.9 (2435)
Length (Bucket On Ground), in (mm) ...................... 119.3 (3030)
Width (w/o Bucket), in (mm) ...................... 49.2 (1250)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 112 (2845)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 18.5 (470)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 22
Bucket Width, in (mm) ...................... 60 (1520)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 75.6 (1920)
Turning Radius (Front w/o Bucket), in (mm) ...................... 48.6 (1235)
Turning Radius (Rear), in (mm) ...................... 56.5 (1435)
Shipping weight, lbs (kg) ...................... 4750 (2160)
Operating Weight, lbs (kg) ...................... 5060 (2300)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |