Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2600R

Mustang 2600R Specifications

The Mustang 2600R skid steer loader driveline system components: Yanmar 4TNV98CT-NMS four-cycle vertical four-cylinder direct injection turbocharged diesel engine with a rated power of 70.7 hp (52.7 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 23.5 gal/min (89.6 l/min) or 35 gal/min (132.6 l/min). The Mustang 2600R is equipped with a radial-lift boom, 100H drive chains, and 12x16.5 HD standard tires. The skid steer has a maximum lift height of 123" (3125 mm) to hinge pin and dump height of 94" (2390 mm). The rated operating capacity is 2600 lbs (1180 kg), and tipping load is 5200 lbs (2360 kg).

Engine Specs

Engine Model ...................... Yanmar 4TNV98CT-NMS
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.6 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 70.7 (52.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 294 (217)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 21.5 (81.4)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95

Drive Train

Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 12x16.5 HD
Rear Tire Size ...................... 12x16.5 HD
Chaincase Capacity, qts (L) ...................... 11.0 (10.4)
Maximum Speed (Single), mph (km/h) ...................... 8.0 (12.9)
Maximum Speed (Two), mph (km/h) ...................... 11.9 (19.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 23.5 (89.6)
Pump Capacity (High Flow), gpm (Lpm) ...................... 35.0 (132.6)
System Pressure, Bar (psi) ...................... 228 (3300)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
Hydraulic System Capacity, gal (L) ...................... 12.0 (45.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2600 (1180)
Tipping Load, lbs (kg) ...................... 5200 (2360)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 49.5 (1255)
Height (Operator Cab), in (mm) ...................... 81 (2055)
Height (Boom Raised), in (mm) ...................... 161 (4090)
Length (w/o Bucket), in (mm) ...................... 111.5 (2830)
Length (Bucket On Ground), in (mm) ...................... 143 (3630)
Width (w/o Bucket), in (mm) ...................... 65.5 (1665)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 123 (3125)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 94 (2390)
Dump Reach At Max Height, in (mm) ...................... 27 (685)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 70 (1780)
Ground Clearance, in (mm) ...................... 8 (203)
Turning Radius (Front w/Bucket), in (mm) ...................... 90 (2285)
Turning Radius (Front w/o Bucket), in (mm) ...................... 56 (1420)
Turning Radius (Rear), in (mm) ...................... 64 (1625)
Operating Weight, lbs (kg) ...................... 8200 (3720)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS