____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2600R |
Mustang 2600R Maintenance
The
Mustang 2600R skid steer loader driveline system components: Yanmar 4TNV98CT-NMS
four-cycle vertical four-cylinder direct injection turbocharged diesel engine
with a rated power of 70.7 hp (52.7 kW), and 1-speed or 2-speed hydrostatic
transmission. The hydraulic system has a pump with a rated capacity of 23.5
gal/min (89.6 l/min) or 35 gal/min (132.6 l/min). The Mustang 2600R is equipped
with a radial-lift boom, 100H drive chains, and 12x16.5 HD standard
tires. The skid steer has a maximum lift height of 123" (3125 mm) to
hinge pin and dump height of 94" (2390 mm). The rated operating capacity is 2600
lbs (1180 kg), and tipping load is 5200 lbs (2360 kg).
| Refill Capacities |
Fuel Tank Capacity, gal (L) ...................... 21.5 (81.4)
Engine Oil Capacity, gal (L) ...................... 2.7 (10.2)
Engine Coolant Capacity, gal (L) ...................... 3.4 (13.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 8.0 (30.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 12.0 (45.4)
Chain Case Oil Capacity, gal (L) ...................... 2.7 (10.4)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CK-4, CJ-4
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Petro Canada HVI60, Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... Mobil DTE 15M or SAE 10W30
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check Battery Condition...................... Every 100 Hours
Check Hydraulic Fluid Level ...................... Every 250 Hours
Check Chain Case Oil Level ...................... Every 250 Hours
Check Alternator Belt ...................... Every 250 Hours
Check Drive Chain Tension ...................... Every 250 Hours
Change Engine Oil ...................... Every 250 Hours
Replace Engine Oil Filter ...................... Every 250 Hours
Replace Fuel Filter ...................... Every 250 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Adjust Parking Brake ...................... Every 500 Hours
Check Radiator Hoses and Clamps ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Air Filter ...................... Every 1000 Hours
Replace Secondary Air Filter ...................... Every 1000 Hours
Change Engine Coolant ...................... Every 1000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 195568
Engine Fuel Filter. Part Number ...................... 50352550
Fuel/Water Separator. Part Number ...................... 50352551
Primary Engine Air Filter. Part Number ...................... 184146
Secondary Engine Air Filter. Part Number ...................... 184195
Hydraulic Oil Filter. Part Number ...................... 074830
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |