Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2044 |
Mustang 2044 Specifications
The Mustang 2044 skid steer loader driveline system components: a 133.6 cu.in (2.19L) Yanmar 4TNV88 4-cylinder vertical direct injection water-cooled diesel engine with a rated power of 47 hp (34.2 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 18.5 gal/min (70 l/min). The system pressure is 2350 psi (162 bar). The Mustang 2044 is equipped with a radial-lift boom, 80K drive chains, and 10x16.5 HD standard tires. The skid steer has a maximum lift height of 112" (2845 mm) to hinge pin and dump height of 88.2" (2240 mm). The rated operating capacity is 1450 lbs (659 kg), and tipping load is 2900 lbs (1320 kg).
Engine Specs |
Engine Model ...................... Yanmar 4TNV88
Engine Type ...................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 133.6 (2.19)
Cylinder Bore, in (mm) ...................... 3.47 (88.0)
Piston Stroke, in (mm) ...................... 3.54 (90.0)
Rated Engine Power, hp (kW) ...................... 47.0 (34.2)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 145 (108)
Torque Speed, rpm ...................... 1680
Aspiration Type ...................... Naturally aspirated
Firing Order ...................... 1-3-4-2
Direction of Rotation ...................... Counterclockwise (Flywheel Side)
Combustion System ...................... Ball type swirl chamber
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Fuel Filter Type ...................... Replaceable element
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled with radiator
Emission Level ...................... Final Tier 3
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 14.3 (54.1)
Engine Oil Capacity, qts (L) ...................... 9.1 (8.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
Drive Train |
Drive System Type ...................... Hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80K roller chain
Front Tire Size ...................... 10x16.5 HD
Rear Tire Size ...................... 10x16.5 HD
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 7.1 (10.6)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 18.5 (70.0)
System Pressure, Bar (psi) ...................... 162 (2350)
Hydraulic Reservoir Capacity, gal (L) ...................... 11.9 (45.0)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1450 (659)
Tipping Load, lbs (kg) ...................... 2900 (1320)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 36.7 (930)
Height (Operator Cab), in (mm) ...................... 77.8 (1975)
Height (Boom Raised), in (mm) ...................... 143.5 (3645)
Length (w/o Bucket), in (mm) ...................... 95 (2415)
Length (Bucket On Ground), in (mm) ...................... 123.4 (3135)
Width (w/o Bucket), in (mm) ...................... 59.1 (1500)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 112 (2845)
Dump Angle At Max Height, deg ...................... 32
Dump Height (Fully Raised), in (mm) ...................... 88.2 (2240)
Dump Reach At Max Height, in (mm) ...................... 25.8 (655)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 24
Bucket Width, in (mm) ...................... 61 (1550)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 73 (1855)
Turning Radius (Front w/o Bucket), in (mm) ...................... 39.4 (1000)
Turning Radius (Rear), in (mm) ...................... 50.6 (1285)
Operating Weight, lbs (kg) ...................... 5610 (2550)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |