____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2041 |
Mustang 2041 Maintenance
The
Mustang 2041 skid steer loader is powered by Yanmar 4TNV88-XMS2 vertical
four-cylinder naturally aspirated water-cooled diesel engine with a rated power
of 46 hp (34 kW) at 2600 rpm. The Mustang 2041 is equipped with a radial-lift
loader boom, single-speed hydrostatic transmission, 80K drive chains, and
10x16.5 HD standard tires. The hydraulic system has a pump with fluid flow rate
of 16.5 gpm (62 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid
steer loader has a rated operating capacity of 1350 lbs (612 kg) and tipping
load of 2700 lbs (1225 kg). The lift height is 110 inches (2795 mm) to hinge
pin, and dump height is 86.5 inches (2195 mm).
| Refill Capacities |
Fuel Tank Capacity, gal (L) ...................... 12.4 (47.0)
Engine Oil Capacity, gal (L) ...................... 2.3 (8.6)
Engine Coolant Capacity, gal (L) ...................... 2.6 (10.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 8.0 (30.2)
Chain Case Oil Capacity, gal (L) ...................... 2.0 (7.6)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CH-4, CI-4
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... Mobil DTE 15M or SAE 10W30
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check Battery Condition...................... Every 100 Hours
Check Hydraulic Fluid Level ...................... Every 250 Hours
Check Chain Case Oil Level ...................... Every 250 Hours
Check Alternator Belt ...................... Every 250 Hours
Check Drive Chain Tension ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Adjust Parking Brake ...................... Every 500 Hours
Check Radiator Hoses and Clamps ...................... Every 500 Hours
Replace Fuel Filter ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Air Filter ...................... Every 1000 Hours
Replace Secondary Air Filter ...................... Every 1000 Hours
Change Engine Coolant ...................... Every 1000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 182131
Engine Fuel Filter. Part Number ...................... 182130
Primary Engine Air Filter. Part Number ...................... 188814
Secondary Engine Air Filter. Part Number ...................... 188817
Hydraulic Oil Filter. Part Number ...................... 074830
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |