____________________________________________________________________________________
| Home / Skid Steer Loaders / Mustang Skid Steer Loaders / Mustang 2032 |
Mustang 2032 Maintenance
The
Mustang 2032 skid steer loader is powered by 100.2 cu.in (1.64L) Yanmar 3TNV88
4-cycle 3-cylinder direct injection naturally aspirated liquid-cooled diesel
engine with a rated power of 36 hp (27 kW) at 3000 rpm. The Mustang 2032 is
equipped with a radial-lift loader boom, single-speed hydrostatic transmission,
80K drive chains, and 27x10.5x15 (Std) or 10.0x16.5 (Opt) tires. The hydraulic
system has a pump with fluid flow rate of 14.5 gpm (54.5 lpm). The skid steer
loader has a rated operating capacity of 1250 lbs (567 kg) and tipping load of
2500 lbs (1135 kg). The lift height is 110 inches (2795 mm) to hinge pin, and
dump height is 86.5 inches (2195 mm).
| Refill Capacities |
Fuel Tank Capacity, gal (L) ...................... 10.4 (39.5)
Engine Oil Capacity, gal (L) ...................... 1.9 (7.2)
Engine Coolant Capacity, gal (L) ...................... 1.6 (6.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 8.0 (30.3)
Chain Case Oil Capacity, gal (L) ...................... 5.0 (19.0)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CF-4, CG-4
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... Mobil DTE 15M or SAE 10W30
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Hydraulic Fluid Level ...................... Every 50 Hours
Check Chain Case Oil Level ...................... Every 100 Hours
Check Alternator Belt ...................... Every 100 Hours
Check Drive Chain Tension ...................... Every 100 Hours
Check Battery Condition...................... Every 100 Hours
Change Engine Oil ...................... Every 250 Hours
Replace Engine Oil Filter ...................... Every 250 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Adjust Parking Brake ...................... Every 500 Hours
Check Radiator Hoses and Clamps ...................... Every 500 Hours
Replace Fuel Filter ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 500 Hours
Replace Primary Air Filter ...................... Every 1000 Hours
Replace Secondary Air Filter ...................... Every 1000 Hours
Change Engine Coolant ...................... Every 1000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 425-34635
Engine Fuel Filter. Part Number ...................... 425-34636
Primary Engine Air Filter. Part Number ...................... 420-36075
Secondary Engine Air Filter. Part Number ...................... 420-36076
Hydraulic Oil Filter. Part Number ...................... 170-33635
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |