Home / Skid Steer Loaders / John Deere Skid Steer Loaders / John Deere 4475

John Deere 4475 Specifications

The John Deere 4475 skid steer loader is powered by 91.3 cu.in (1.5L) Yanmar 3TNE84D 3-cylinder liquid-cooled diesel engine with a rated power of 31 hp (23 kW) at 3000 rpm. The John Deere 4475 is equipped with a vertical-lift loader boom, one-speed hydrostatic transmission, heavy-duty drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 11 gpm (42 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer loader has a rated operating capacity of 1360 lbs (617 kg) and tipping load of 2750 lbs (1250 kg). The lift height is 111 inches (2820 mm) to hinge pin, and dump height is 87.9 inches (2235 mm).

Engine Specs

Engine Model ...................... John Deere 3015D / Yanmar 3TNE84D
Engine Type ...................... Vertical in-line 4-cycle 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 91.3 (1.5)
Cylinder Bore, in (mm) ...................... 3.32 (84.0)
Piston Stroke, in (mm) ...................... 3.56 (90.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 31.0 (23.0)
Rated Engine Speed, rpm ...................... 3000
Slow Idle Speed, rpm ...................... 900-1000
Fast Idle Speed, rpm ...................... 3125-3175
Firing Order ...................... 1-3-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable Element
Governor Type ...................... Mechanical
Air Cleaner Type ...................... Dry dual element
Lubrication System ...................... Full pressure
Cooling System ...................... Liquid-cooled
Fuel Tank Capacity, gal (L) ...................... 10.0 (37.9)
Oil Capacity, qts (L) ...................... 7.7 (7.3)
Coolant Capacity, qts (L) ...................... 10.8 (10.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ...................... 4-wheel drive, hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... HD roller chains, continuous loop
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 27x8.50-15
Rear Tire Size (Opt) ...................... 27x8.50-15
Chain Case Capacity, qts (L) ...................... 6.0 (5.7)
Forward Speed, mph (kph) ...................... 6.5 (10.5)
Reverse Speed, mph (kph) ...................... 6.5 (10.5)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1360 (617)
Tipping Load, lbs (kg) ...................... 2750 (1250)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 37.4 (950)
Height (Operator Cab), in (mm) ...................... 72.4 (1840)
Length (w/o Bucket), in (mm) ...................... 96.3 (2445)
Length (Bucket On Ground), in (mm) ...................... 120 (3050)
Width (w/o Bucket), in (mm) ...................... 60 (1525)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 111 (2820)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 87.9 (2235)
Dump Reach At Max Height, in (mm) ...................... 20.3 (515)
Rollback Angle At Ground Level, deg ...................... 36
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 60 (1525)
Ground Clearance, in (mm) ...................... 8.3 (210)
Shipping Weight, lbs (kg) ...................... 4000 (1820)
Operating Weight, lbs (kg) ...................... 4360 (1980)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS