____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl V420 |
Gehl V420 Specifications
The
Gehl V420 skid steer loader is powered by 221 cu.in (3.6L) Deutz TCD 3.6
four-cycle four-cylinder vertical in-line direct injection turbocharged
liquid-cooled diesel engine with a rated power of 99 hp (74 kW) at 2200 rpm. The
Gehl V420 is equipped with a vertical-lift boom, two-speed hydrostatic
transmission, 100K drive chains, and 14x17.5 HD standard tires. The hydraulic
system has a pump with fluid flow rate of 30 gpm (114 lpm) or 41 gpm (155 lpm).
The skid steer loader has a rated operating capacity of 4200 lbs (1905 kg) and
tipping load of 8400 lbs (3810 kg). The lift height is 143.6" (3645 mm) to
hinge pin, and dump height is 115" (2920 mm).
| Engine Specs |
Engine Model ...................... Deutz TCD 3.6
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 221 (3.6)
Cylinder Bore, in (mm) ...................... 3.90 (98.0)
Piston Stroke, in (mm) ...................... 4.70 (120.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 99.0 (74.0)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 480 (354)
Torque Speed, rpm ...................... 1600
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common Rail injection
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Tier 4
Fuel Tank Capacity, gal (L) ...................... 38.0 (144.0)
Engine Oil Capacity, qts (L) ...................... 8.4 (8.0)
Cooling System Capacity, qts (L) ...................... 21.0 (20.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 120
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Two (Low-high)
Chain Drive Type ...................... 100K roller chain
Front Tire Size ...................... 14x17.5 HD
Rear Tire Size ...................... 14x17.5 HD
Chaincase Capacity, qts (L) ...................... 12.0 (11.4)
Maximum Speed (Low), mph (km/h) ...................... 6.5 (10.5)
Maximum Speed (High), mph (km/h) ...................... 11.6 (18.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 30.1 (114.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 41.0 (155.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Reservoir Capacity, gal (L) ...................... 15.9 (60.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 4200 (1905)
Tipping Load, lbs (kg) ...................... 8400 (3810)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 54.6 (1385)
Height (Operator Cab), in (mm) ...................... 82 (2085)
Height (Boom Raised), in (mm) ...................... 186.8 (4745)
Length (w/o Bucket), in (mm) ...................... 123 (3125)
Length (Bucket On Ground), in (mm) ...................... 159 (4040)
Width (w/o Bucket), in (mm) ...................... 81 (2055)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 143.6 (3645)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 115 (2920)
Dump Reach At Max Height, in (mm) ...................... 38 (965)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 18
Bucket Width, in (mm) ...................... 84 (2135)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (Front w/Bucket), in (mm) ...................... 97.8 (2485)
Turning Radius (Front w/o Bucket), in (mm) ...................... 55.5 (1410)
Turning Radius (Rear), in (mm) ...................... 74 (1880)
Operating Weight, lbs (kg) ...................... 11665 (5290)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |