____________________________________________________________________________________

Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl V420

Gehl V420 Maintenance

The Gehl V420 skid steer loader is powered by 221 cu.in (3.6L) Deutz TCD 3.6 four-cycle four-cylinder vertical in-line direct injection turbocharged liquid-cooled diesel engine with a rated power of 99 hp (74 kW) at 2200 rpm. The Gehl V420 is equipped with a vertical-lift boom, two-speed hydrostatic transmission, 100K drive chains, and 14x17.5 HD standard tires. The hydraulic system has a pump with fluid flow rate of 30 gpm (114 lpm) or 41 gpm (155 lpm). The skid steer loader has a rated operating capacity of 4200 lbs (1905 kg) and tipping load of 8400 lbs (3810 kg). The lift height is 143.6" (3645 mm) to hinge pin, and dump height is 115" (2920 mm).

Refill Capacities

Fuel Tank Capacity, gal (L) ...................... 38.0 (144.0)
Engine Oil Capacity, gal (L) ...................... 2.1 (8.0)
Engine Coolant Capacity, gal (L) ...................... 5.3 (20.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 15.9 (60.0)
Chain Case Oil Capacity, gal (L) ...................... 3.0 (11.4)

Recommended Oil and Fluid

Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CI-4 or higher
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Petro Canada HVI60, Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... Mobil DTE 15M or SAE 10W30

Service Intervals

Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check Battery Condition...................... Every 100 Hours
Check Hydraulic Fluid Level ...................... Every 250 Hours
Check Chain Case Oil Level ...................... Every 250 Hours
Check Alternator Belt ...................... Every 250 Hours
Check Drive Chain Tension ...................... Every 250 Hours
Change Engine Oil ...................... Every 250 Hours
Replace Engine Oil Filter ...................... Every 250 Hours
Replace Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Adjust Parking Brake ...................... Every 500 Hours
Check Radiator Hoses and Clamps ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Air Filter ...................... Every 1000 Hours
Replace Secondary Air Filter ...................... Every 1000 Hours
Change Engine Coolant ...................... Every 1000 Hours

Replacement Parts

Engine Oil Filter. Part Number ...................... 132023
Primary Fuel Filter. Part Number ...................... 50302445
Final Fuel Filter. Part Number ...................... 50302441
Primary Engine Air Filter. Part Number ...................... 50308863
Secondary Engine Air Filter. Part Number ...................... 50308858
Hydraulic Oil Filter. Part Number ...................... 189742
Fresh Air Intake Filter. Part Number ...................... 195660
Recirculation Air Filter. Part Number ...................... 242832

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS