____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl V400 |
Gehl V400 Specifications
The
Gehl V400 skid steer loader driveline system components: a 273 cu.in (4.5L)
Cummins QSB4.5 four-cylinder turbocharged liquid-cooled diesel engine with a
rated power of 99 hp (74 kW), and two-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 32 gpm (121 lpm) or 41 gpm
(155 lpm). The system pressure is 3450 psi (238 bar). The Gehl V400 is
equipped with a vertical-lift boom, 100H drive chains, and 14x17.5 tires. The skid steer loader has a max lift height of 143.6" (3645 mm) to hinge
pin and dump height of 114.8" (2915 mm). The rated operating capacity is 4000
lbs (1814 kg), and tipping load is 8000 lbs (3630 kg).
| Engine Specs |
Engine Model ...................... Cummins QSB4.5
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 273 (4.5)
Cylinder Bore, in (mm) ...................... 4.02 (102.0)
Piston Stroke, in (mm) ...................... 5.39 (137.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 99.0 (74.0)
Rated Engine Speed, rpm ...................... 2200
Maximum Torque, Nm (lb-ft) ...................... 442 (326)
Torque Speed, rpm ...................... 1300
Compression Ratio ...................... 16.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Bosch Electronic
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Tier 3
Fuel Tank Capacity, gal (L) ...................... 31.3 (118.0)
Engine Oil Capacity, qts (L) ...................... 11.8 (11.1)
Cooling System Capacity, qts (L) ...................... 16.0 (15.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 130
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Two (Low-high)
Chain Drive Type ...................... 100H roller chain
Front Tire Size ...................... 14x17.5
Rear Tire Size ...................... 14x17.5
Chaincase Capacity, qts (L) ...................... 12.0 (11.4)
Maximum Speed (Low), mph (km/h) ...................... 6.5 (10.5)
Maximum Speed (High), mph (km/h) ...................... 12.5 (19.8)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity (Standard), gpm (Lpm) ...................... 32.0 (121.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 41.0 (155.0)
System Pressure, Bar (psi) ...................... 238 (3450)
Hydraulic Reservoir Capacity, gal (L) ...................... 16.8 (63.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 4000 (1814)
Tipping Load, lbs (kg) ...................... 8000 (3630)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 54.6 (1385)
Height (Operator Cab), in (mm) ...................... 82 (2085)
Height (Boom Raised), in (mm) ...................... 186.8 (4745)
Length (w/o Bucket), in (mm) ...................... 121.5 (3085)
Length (Bucket On Ground), in (mm) ...................... 158.5 (4025)
Width (w/o Bucket), in (mm) ...................... 79.5 (2020)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 143.6 (3645)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 114.8 (2915)
Dump Reach At Max Height, in (mm) ...................... 39.5 (1005)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 19
Bucket Width, in (mm) ...................... 84 (2135)
Ground Clearance, in (mm) ...................... 7.3 (185)
Turning Radius (Front w/Bucket), in (mm) ...................... 88.5 (2250)
Turning Radius (Front w/o Bucket), in (mm) ...................... 50.8 (1290)
Turning Radius (Rear), in (mm) ...................... 70.5 (1790)
Operating Weight, lbs (kg) ...................... 11100 (5035)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |