____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl R105 |
Gehl R105 Specifications
The
Gehl R105 skid steer loader is powered by 100.2 cu.in (1.6L) Yanmar 3TNV88C
three-cylinder direct injection liquid-cooled diesel engine with a rated power
of 34.7 hp (25.5 kW) at 2800 rpm. The Gehl R105 is equipped with a single-speed
hydrostatic transmission, radial-lift loader boom, 80H roller chains, and
27-8.5x15 tires. The hydraulic system has a pump with fluid flow rate of 14.5
gpm (55 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer
loader has a rated operating capacity of 1050 lbs (475 kg) and tipping load of
2100 lbs (950 kg). The lift height is 107.5 inches (2730 mm) to hinge pin, and
dump height is 82 inches (2085 mm).
| Engine Specs |
Engine Model ...................... Yanmar 3TNV88C
Engine Type ...................... 4-cycle three-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 3
Engine Bore, in (mm) ...................... 3.47 (88.0)
Engine Stroke, in (mm) ...................... 3.54 (90.0)
Displacement, cu.in (L) ...................... 100.2 (1.642)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 34.7 (25.5)
Rated Engine Speed, rpm ...................... 2800
Idle Speed, rpm ...................... 1100-2900
Maximum Torque, Nm (lb-ft) ...................... 110 (80)
Torque Speed, rpm ...................... 1680
Compression Ratio ...................... 19.1:1
Firing Order ...................... 1-3-2
Direction of Rotation ...................... Counterclockwise (flywheel side)
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical, in-line type
Fuel Filter Type ...................... Single element
Air Cleaner Type ...................... Dual dry element
Lubricating System ...................... Forced lubrication with trochoid pump
Oil Filter Type ...................... Spin on type
Cooling System ...................... Liquid-cooled with radiator
Intake Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 10.0 (38.0)
Engine Oil capacity, qts (L) ...................... 7.6 (7.2)
Coolant Capacity, qts (L) ...................... 6.3 (6.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size ...................... 27-8.5x15
Rear Tire Size ...................... 27-8.5x15
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Forward Speed, mph (km/h) ...................... 5.1 (8.3)
Reverse Speed, mph (km/h) ...................... 5.1 (8.3)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 14.5 (55.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 8.0 (30.3)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1050 (475)
Tipping Load, lbs (kg) ...................... 2100 (950)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 34.5 (875)
Height (Operator Cab), in (mm) ...................... 70.3 (1785)
Height (Boom Raised), in (mm) ...................... 142 (3605)
Length (w/o Bucket), in (mm) ...................... 88.5 (2250)
Length (Bucket On Ground), in (mm) ...................... 118 (2995)
Width (w/o Bucket), in (mm) ...................... 48.4 (1230)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 107.5 (2730)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 82 (2085)
Dump Reach At Max Height, in (mm) ...................... 25.2 (640)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 101
Departure Angle, deg ...................... 22
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 6.3 (160)
Turning Radius (w/Bucket), in (mm) ...................... 72 (1830)
Operating Weight, lbs (kg) ...................... 4200 (1905)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |