____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4835 SXT |
Gehl 4835 SXT Specifications
The
Gehl SL 4835 SXT skid steer loader is powered by 133 cu.in (2.18L) Deutz
BF3M1011F three-cylinder direct injection turbocharged diesel engine with a
rated power of 57 hp (42.5 kW) at 2500 rpm. The Gehl 4835SXT is equipped with a
radial-lift boom, single-speed hydrostatic transmission, 80E drive chains, and
10x16.5 or 12x16.5 tires. The hydraulic system has a pump with fluid flow rate
of 19 gpm (72 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer
loader has a rated operating capacity of 1625 lbs (737 kg) and tipping load of
3250 lbs (1475 kg). The lift height is 115 inches (2920 mm) to hinge pin, and
dump height is 87.2 inches (2215 mm).
| Engine Specs |
Engine Model ...................... Deutz BF3M1011F
Engine Type ...................... Vertical 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 133 (2.18)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 57.0 (42.5)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 190 (140)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Fuel Tank Capacity, gal (L) ...................... 17.0 (64.0)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80E roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 12.00x16.5
Rear Tire Size (Opt) ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 8.5 (13.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 19.0 (72.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1625 (737)
Tipping Load, lbs (kg) ...................... 3250 (1475)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 41.1 (1045)
Height (Operator Cab), in (mm) ...................... 76 (1935)
Height (Boom Raised), in (mm) ...................... 153 (3885)
Length (w/o Bucket), in (mm) ...................... 93.6 (2375)
Length (Bucket On Ground), in (mm) ...................... 125.3 (3185)
Width (w/o Bucket), in (mm) ...................... 62 (1575)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115 (2920)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 87.2 (2215)
Dump Reach At Max Height, in (mm) ...................... 27.6 (700)
Rollback Angle At Ground Level, deg ...................... 27
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 28
Grading Angle, deg ...................... 87
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.0 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 79.5 (2020)
Turning Radius (Front w/o Bucket), in (mm) ...................... 47 (1195)
Turning Radius (Rear), in (mm) ...................... 59 (1500)
Shipping Weight, lbs (kg) ...................... 5300 (2500)
Operating Weight, lbs (kg) ...................... 6300 (2900)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |