____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4835 |
Gehl 4835 Specifications
The
Gehl SL4835 skid steer loader driveline system components: Deutz BF3M1011F
vertical 3-cylinder turbocharged liquid-cooled diesel engine with a rated power
of 57 hp (42.5 kW), and 1-speed hydrostatic transmission. The hydraulic system
has a pump with a rated capacity of 19 gal/min (72 l/min). The system relief
pressure is 2750 psi (190 bar). The Gehl SL4835 is equipped with a radial-lift
loader boom, 80E drive chains, and 10.00x16.5 standard tires. The skid steer
has a maximum lift height of 115" (2920 mm) to hinge pin and dump height
of 87.2" (2215 mm). The rated operating capacity is 1625 lbs (737 kg), and
tipping load is 3250 lbs (1475 kg).
| Engine Specs |
Engine Model ...................... Deutz BF3M1011F
Engine Type ...................... Vertical 3-cylinder liquid-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 133 (2.18)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.41 (112.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 57.0 (42.5)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 190 (140)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Valve Clearance (Inlet), in (mm) ...................... 0.012-0.016 (0.30-0.40)
Valve Clearance (Exhaust), in (mm) ...................... 0.020-0.024 (0.50-0.60)
Fuel Tank Capacity, gal (L) ...................... 17.0 (64.0)
Oil Capacity, qts (L) ...................... 8.5 (8.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80E roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 12.00x16.5
Rear Tire Size (Opt) ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 8.0 (7.6)
Maximum Speed, mph (km/h) ...................... 8.5 (13.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Capacity, gpm (Lpm) ...................... 19.0 (72.0)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1625 (737)
Tipping Load, lbs (kg) ...................... 3250 (1475)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 41.1 (1045)
Height (Operator Cab), in (mm) ...................... 76 (1935)
Height (Boom Raised), in (mm) ...................... 153 (3885)
Length (w/o Bucket), in (mm) ...................... 93.6 (2375)
Length (Bucket On Ground), in (mm) ...................... 125.3 (3185)
Width (w/o Bucket), in (mm) ...................... 62 (1575)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 115 (2920)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 87.2 (2215)
Dump Reach At Max Height, in (mm) ...................... 27.6 (700)
Rollback Angle At Ground Level, deg ...................... 27
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 28
Grading Angle, deg ...................... 87
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.0 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 79.5 (2020)
Turning Radius (Front w/o Bucket), in (mm) ...................... 47 (1195)
Turning Radius (Rear), in (mm) ...................... 59 (1500)
Shipping Weight, lbs (kg) ...................... 5300 (2500)
Operating Weight, lbs (kg) ...................... 6300 (2900)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |