Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4625 SX |
Gehl 4625SX Specifications
The Gehl 4625SX skid steer loader is powered by 134.1 cu.in (2.2L) Kubota V2203 4-cylinder direct injection water-cooled diesel engine with a rated power of 45.4 hp (33.8 kW) at 2600 rpm. The Gehl 4625 SX is equipped with 1-speed hydrostatic transmission, radial-lift loader boom, 80H roller chains, and 10.5x15 or 29-12.5x15 tires. The hydraulic system has a pump with fluid flow rate of 18 gpm (68.2 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 1350 lbs (615 kg) and tipping load of 2700 lbs (1230 kg). The max lift height is 114.8 inches (2915 mm) to hinge pin, and dump height is 90.9 inches (2310 mm).
Engine Specs |
Engine Model ...................... Kubota V2203
Engine Type ...................... Vertical water-cooled 4-cylinder diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 45.4 (33.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 146 (108)
Torque Speed, rpm ...................... 1600
Idle Speed, rpm ...................... 1075-3000
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication with filter
Combustion Chamber ...................... Spherical type (E-TVCS)
Fuel Tank Capacity, gal (L) ...................... 11.2 (42.3)
Oil Capacity, qts (L) ...................... 10.0 (9.5)
Coolant Capacity, qts (L) ...................... 12.0 (11.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 35
Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Tire Size (Std) ...................... 10x16.5
Tire Size (Opt) ...................... 29-12.5x15
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Planetary Gearbox Capacity, qts (L) ...................... 1.0 (0.9)
Forward Speed, mph (km/h) ...................... 7.0 (11.2)
Reverse Speed, mph (km/h) ...................... 7.0 (11.2)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 18.0 (68.2)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 10.0 (37.9)
Number of Valves ...................... 3
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1350 (615)
Tipping Load, lbs (kg) ...................... 2700 (1230)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37.3 (945)
Height (Operator Cab), in (mm) ...................... 76.5 (1945)
Height (Boom Raised), in (mm) ...................... 144.4 (3660)
Length (w/o Bucket), in (mm) ...................... 92 (2335)
Length (Bucket On Ground), in (mm) ...................... 118.2 (3000)
Width (w/o Bucket), in (mm) ...................... 62 (1575)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.8 (2915)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 90.9 (2310)
Dump Reach At Max Height, in (mm) ...................... 23 (585)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 105
Departure Angle, deg ...................... 25
Grading Angle, deg ...................... 102
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (w/Bucket), in (mm) ...................... 72 (1840)
Shipping Weight, lbs (kg) ...................... 4780 (2170)
Operating Weight, lbs (kg) ...................... 5245 (2380)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |