Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4525 |
Gehl 4525 Specifications
The Gehl 4525 skid steer loader is powered by 79 cubic inches (1.3L) Ford VSG-413 vertical in-line four-cylinder gasoline engine with a rated power of 42 hp (31.3 kW) at 3000 rpm. The Gehl 4525 is equipped with a radial-lift loader boom, single-speed hydrostatic transmission, 80H drive chains, and 10.0x16.5 or 12.0x16.5 tires. The hydraulic system has a pump with fluid flow rate of 18 gpm (68.2 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer loader has a rated operating capacity of 1225 lbs (557 kg) and tipping load of 2450 lbs (1115 kg). The lift height is 114.8 inches (2915 mm) to hinge pin, and dump height is 90.9 inches (2310 mm).
Engine Specs |
Engine Model ...................... Ford VSG-413
Engine Type ...................... Vertical 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 79 (1.3)
Cylinder Bore, in (mm) ...................... 2.91 (74.0)
Piston Stroke, in (mm) ...................... 3.00 (75.7)
Rated Engine Power, hp (kW) ...................... 42.0 (31.3)
Rated Engine Speed, rpm ...................... 3000
Idle Speed, rpm ...................... 700-800
Maximum Torque, Nm (lb-ft) ...................... 98 (73)
Torque Speed, rpm ...................... 2000
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburator
Air Cleaner Type ...................... Dual element
Spark Plugs Type ...................... AGSF 22C
Spark Plugs Gap, in (mm) ...................... 0.04 (1.0)
Distributor Point Gap, in (mm) ...................... 0.016-0.02 (0.40-0.50)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.22)
Valve Lash (Exhaust), in (mm) ...................... 0.012 (0.32)
Fuel Tank Capacity, gal (L) ...................... 11.2 (42.3)
Oil Capacity, qts (L) ...................... 3.9 (3.7)
Coolant Capacity, qts (L) ...................... 8.0 (7.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 35
Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size (Std) ...................... 10.0x16.5
Rear Tire Size (Std) ...................... 10.0x16.5
Front Tire Size (Opt) ...................... 12.0x16.5
Rear Tire Size (Opt) ...................... 12.0x16.5
Chaincase Capacity, qts (L) ...................... 6.0 (5.7)
Maximum Speed, mph (km/h) ...................... 7.0 (11.2)
Hydraulic System |
Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 18.0 (68.2)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 10.0 (37.9)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1225 (557)
Tipping Load, lbs (kg) ...................... 2450 (1115)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 37.3 (945)
Height (Operator Cab), in (mm) ...................... 76.5 (1945)
Height (Boom Raised), in (mm) ...................... 144.4 (3660)
Length (w/o Bucket), in (mm) ...................... 92 (2335)
Length (Bucket On Ground), in (mm) ...................... 118.2 (3000)
Width (w/o Bucket), in (mm) ...................... 62 (1575)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.8 (2915)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 90.9 (2310)
Dump Reach At Max Height, in (mm) ...................... 23 (585)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 105
Departure Angle, deg ...................... 25
Grading Angle, deg ...................... 102
Bucket Width, in (mm) ...................... 65 (1650)
Ground Clearance, in (mm) ...................... 7.7 (195)
Turning Radius (Front w/Bucket), in (mm) ...................... 72 (1840)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.5 (1130)
Turning Radius (Rear), in (mm) ...................... 55.4 (1405)
Shipping Weight, lbs (kg) ...................... 4510 (2045)
Operating Weight, lbs (kg) ...................... 4960 (2255)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |