____________________________________________________________________________________
| Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 4525 |
Gehl 4525 Maintenance
The
Gehl 4525 skid steer loader is powered by 79 cubic inches (1.3L) Ford VSG-413
vertical in-line four-cylinder gasoline engine with a rated power of 42 hp (31.3
kW) at 3000 rpm. The Gehl 4525 is equipped with a radial-lift loader boom,
single-speed hydrostatic transmission, 80H drive chains, and 10.0x16.5 or
12.0x16.5 tires. The hydraulic system has a pump with fluid flow rate of 18 gpm
(68.2 lpm). The hydraulic pressure is 2750 psi (190 bar). The skid steer loader
has a rated operating capacity of 1225 lbs (557 kg) and tipping load of 2450 lbs
(1115 kg). The lift height is 114.8 inches (2915 mm) to hinge pin, and dump
height is 90.9 inches (2310 mm).
| Refill Capacities |
Fuel Tank Capacity, gal (L) ...................... 11.2 (42.3)
Engine Oil Capacity, gal (L) ...................... 1.0 (3.7)
Engine Coolant Capacity, gal (L) ...................... 2.0 (7.6)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 10.0 (37.9)
Chain Case Oil Capacity, gal (L) ...................... 1.5 (5.7)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 5W-30, 10W-30, 15W-40. API Service Category SH/CC or SH/CD
Engine Coolant Type ...................... 50/50 Antifreeze/Coolant
Hydraulic Fluid Type ...................... Mobil DTE 15M or equivalent
Chain Case Oil Type ...................... SAE 10W30
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 50 Hours
Check Chain Case Oil Level ...................... Every 50 Hours
Check Hydraulic Fluid Level ...................... Every 50 Hours
Check Alternator Belt ...................... Every 100 Hours
Check Drive Chain Tension ...................... Every 100 Hours
Check Battery ...................... Every 100 Hours
Change Engine Oil ...................... Every 100 Hours
Replace Engine Oil Filter ...................... Every 100 Hours
Check Radiator Hoses and Clamps ...................... Every 200 Hours
Replace Hydraulic Oil Filter ...................... Every 200 Hours
Replace Fuel Filter ...................... Every 500 Hours
Replace Engine Air Filter ...................... Every 500 Hours
Change Hydraulic Fluid ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 500 Hours
Change Engine Coolant ...................... Every 1000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 083715
Engine Fuel Filter. Part Number ...................... 089314
Engine Air Filter. Part Number ...................... 055017
Hydraulic Oil Filter. Part Number ...................... 074830
Alternator Belt. Part Number ...................... 096682
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |