____________________________________________________________________________________

Home / Skid Steer Loaders / Gehl Skid Steer Loaders / Gehl 3410

Gehl 3410 Specifications

The Gehl 3410 skid steer loader driveline system components: a 59.8 cu.in (0.98L) Isuzu 3KC1/QT-23 vertical inline 3-cylinder water-cooled diesel engine with a rated power of 23 hp (17 kW), and single-speed hydro transmission. The hydraulic system has a pump with a rated capacity of 8.5 gal/min (32.2 l/min). The system pressure is 2200 psi (152 bar). The Gehl 3410 is equipped with a radial-lift boom, 60H drive chains, and 5.70x15 standard tires. The skid steer loader has a maximum lift height of 102" (2590 mm) to hinge pin and dump reach at full height of 15.5" (395 mm). The rated operating capacity is 900 lbs (408 kg), and tipping load is 1800 lbs (815 kg).

Engine Specs

Engine Model ...................... Isuzu 3KC1 (QT-23)
Engine Type ...................... Vertical inline 3-cylinder water-cooled diesel
Number of Cylinders ...................... Three
Displacement, cu.in (L) ...................... 59.8 (0.98)
Cylinder Bore, in (mm) ...................... 2.91 (74.0)
Piston Stroke, in (mm) ...................... 3.00 (76.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 23.0 (17.0)
Rated Engine Speed, rpm ...................... 2600
Idling Speed, rpm ...................... 1000
Maximum Torque, Nm (lb-ft) ...................... 64 (47)
Torque Speed, rpm ...................... 2000
Compression Ratio ...................... 23.0:1
Firing Order ...................... 1-3-2
Fuel System ...................... Fuel injection
Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dry element
Valve Clearance (Intake), in (mm) ...................... 0.010 (0.25)
Valve Clearance (Exhaust), in (mm) ...................... 0.010 (0.25)
Fuel Tank Capacity, gal (L) ...................... 8.5 (32.0)
Oil Capacity, qts (L) ...................... 4.7 (4.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37

Drive Train

Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60H roller chain
Front Tire Size (Std) ...................... 5.70x15
Rear Tire Size (Std) ...................... 5.70x15
Front Tire Size (Opt) ...................... 27x8.50x15
Rear Tire Size (Opt) ...................... 27x8.50x15
Chaincase Capacity, qts (L) ...................... 4.0 (3.8)
Maximum Speed, mph (km/h) ...................... 7.0 (11.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Pump Flow, gpm (Lpm) ...................... 8.5 (32.2)
System Pressure, Bar (psi) ...................... 152 (2200)
Hydraulic Reservoir Capacity, gal (L) ...................... 12.0 (45.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 900 (408)
Tipping Load, lbs (kg) ...................... 1800 (815)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 32 (815)
Height (Operator Cab), in (mm) ...................... 70 (1780)
Height (Boom Raised), in (mm) ...................... 131 (3325)
Length (w/o Bucket), in (mm) ...................... 76 (1930)
Length (Bucket On Ground), in (mm) ...................... 99 (2515)
Width (w/o Bucket), in (mm) ...................... 52 (1320)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 102 (2590)
Dump Angle At Max Height, deg ...................... 35
Dump Reach At Max Height, in (mm) ...................... 15.5 (395)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 54 (1390)
Ground Clearance, in (mm) ...................... 9 (230)
Turning Radius (Front w/Bucket), in (mm) ...................... 59 (1500)
Turning Radius (Front w/o Bucket), in (mm) ...................... 38 (965)
Turning Radius (Rear), in (mm) ...................... 46 (1170)
Shipping Weight, lbs (kg) ...................... 2850 (1295)
Operating Weight, lbs (kg) ...................... 3135 (1420)

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS