____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 262C |
Caterpillar 262C Specifications
The
Caterpillar 262C skid steer loader is powered by Caterpillar C3.4 DIT 4-cylinder
inline direct injection turbocharged liquid-cooled diesel engine with a rated
power of 82 hp (61 kW) at 2500 rpm. The Cat 262C is equipped with a
vertical-lift loader boom, one-speed or two-speed hydrostatic transmission,
100HS drive chains, and 12.00x16.5 standard tires. The hydraulic system has a
pump with fluid flow rate of 22 gpm (84 lpm) or 33 gpm (125 lpm). The skid steer
loader has a rated operating capacity of 2700 lbs (1225 kg) and tipping load of
5400 lbs (2450 kg). The lift height is 127 inches (3235 mm) to hinge pin, and
dump height is 96.4 inches (2450 mm).
| Engine Specs |
Engine Model .................... Caterpillar C3.4 DIT
Engine Type .................... 4-cycle liquid-cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 207.5 (3.40)
Cylinder Bore, in (mm) .................... 3.70 (94.0)
Piston Stroke, in (mm) .................... 4.72 (120.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 82.0 (61.0)
Maximum Engine Power, hp (kW) .................... 84.0 (63.0)
Rated Engine Speed, rpm .................... 2500
Compression Ratio .................... 22:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 3 Interim
Fuel Tank Capacity, gal (L) .................... 26.0 (98.0)
Oil Capacity, qts (L) .................... 10.5 (10.0)
Coolant Capacity, qts (L) .................... 14.8 (14.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 90
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 100HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 12.00x16.5
Rear Tire Size .................... 12.00x16.5
Chaincase Capacity, qts (L) .................... 10.5 (10.0)
Maximum Speed (Single), mph (kph) .................... 7.7 (12.5)
Maximum Speed (Two), mph (kph) .................... 12.0 (19.3)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 22.0 (84.0)
Pump Flow (High Flow), gpm (Lpm) .................... 33.0 (125.0)
System Pressure, Bar (psi) .................... 230 (3335)
Hydraulic Tank Capacity, gal (L) .................... 11.0 (42.0)
Hydraulic System Capacity, gal (L) .................... 15.0 (57.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 2700 (1225)
Tipping Load, lbs (kg) .................... 5400 (2450)
Bucket Breakout Force, lbs (kg) .................... 7315 (3320)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 48.8 (1240)
Height (Operator Cab), in (mm) .................... 82.8 (2105)
Height (Boom Raised), in (mm) .................... 160.4 (4075)
Length (w/o Bucket), in (mm) .................... 117 (2970)
Length (Bucket On Ground), in (mm) .................... 145 (3685)
Width (w/o Bucket), in (mm) .................... 65.8 (1670)
Height to Hinge Pin (Fully Raised), in (mm) .................... 127 (3235)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.8 (200)
Dump Angle At Max Height, deg .................... 50
Dump Height (Fully Raised), in (mm) .................... 96.4 (2450)
Dump Reach At Max Height, in (mm) .................... 30.7 (780)
Rollback Angle At Max Height, deg .................... 85
Departure Angle, deg .................... 26
Bucket Width, in (mm) .................... 66 (1675)
Ground Clearance, in (mm) .................... 8.8 (225)
Turning Radius (Front, w/Bucket), in (mm) .................... 85.3 (2165)
Turning Radius (Front, w/o Bucket), in (mm) .................... 54.6 (1385)
Turning Radius (Rear), in (mm) .................... 68.1 (1730)
Shipping Weight, lbs (kg) .................... 7370 (3350)
Operating Weight, lbs (kg) .................... 7970 (3615)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |