____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 262C |
Caterpillar 262C Maintenance
The
Caterpillar 262C skid steer loader is powered by Caterpillar C3.4 DIT 4-cylinder
inline direct injection turbocharged liquid-cooled diesel engine with a rated
power of 82 hp (61 kW) at 2500 rpm. The Cat 262C is equipped with a
vertical-lift loader boom, one-speed or two-speed hydrostatic transmission,
100HS drive chains, and 12.00x16.5 standard tires. The hydraulic system has a
pump with fluid flow rate of 22 gpm (84 lpm) or 33 gpm (125 lpm). The skid steer
loader has a rated operating capacity of 2700 lbs (1225 kg) and tipping load of
5400 lbs (2450 kg). The lift height is 127 inches (3235 mm) to hinge pin, and
dump height is 96.4 inches (2450 mm).
| Refill Capacities |
Fuel Tank Capacity, gal (L) .................... 26.0 (98.0)
Engine Oil Capacity, gal (L) ...................... 2.6 (10.0)
Engine Coolant Capacity, gal (L) ...................... 3.7 (14.0)
Hydraulic Tank Fluid Capacity, gal (L) ...................... 11.0 (42.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 15.0 (57.0)
Chain Case Oil Capacity, gal (L) ...................... 2.6 (10.0)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CE, CF-4, CG-4, CH-4
Engine Coolant Type ...................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type ...................... Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type ...................... Cat DEO, SAE 15W-40, 5W-40
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check and Adjust Belts ...................... Every 250 Hours
Clean Cab Air Filters ...................... Every 250 Hours
Clean Primary Engine Air Filter ...................... Every 250 Hours
Check and Adjust Drive Chain ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Check Chain Case Oil Level ...................... Every 500 Hours
Replace Hydraulic Tank Breather ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Engine Air Filter ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Replace Cab Air Filters ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 3000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 1R-0734
Engine Fuel Filter. Part Number ...................... 361-9555
Fuel Water Separator. Part Number ...................... 233-9856
Primary Engine Air Filter. Part Number ...................... 110-6326
Secondary Engine Air Filter. Part Number ...................... 110-6331
Hydraulic Oil Filter. Part Number ...................... 1G-8878
Hydraulic Tank Breather. Part Number ...................... 258-2829
Cab Air Filter. Part Number ...................... 231-8132, 303-6658
Engine Drive Belt. Part Number ...................... 529-7680
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |