____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 242D |
Caterpillar 242D Specifications
The
Cat 242D skid steer loader driveline system components: a 203.1 cu.in (3.3L)
Caterpillar C3.3B DIT 4-cylinder turbocharged diesel engine with a rated power
of 73.2 hp (54.6 kW), and 1-speed or 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 20 gal/min (76 l/min) or 30
gal/min (112 l/min). The Caterpillar 242D is equipped with a vertical-lift
loader boom, 80HS drive chains, and 12.00x16.5 standard tires. The skid steer
loader has a maximum lift height of 121.1" (3075 mm) to hinge pin and dump
height of 90" (2285 mm). The rated operating capacity is 2150 lbs (975 kg), and
tipping load is 4300 lbs (1950 kg).
| Engine Specs |
Engine Model .................... Caterpillar C3.3B DIT
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 203.1 (3.30)
Cylinder Bore, in (mm) .................... 3.70 (94.0)
Piston Stroke, in (mm) .................... 4.72 (120.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 73.2 (54.6)
Maximum Engine Power, hp (kW) .................... 74.3 (55.4)
Rated Engine Speed, rpm .................... 2400
Compression Ratio .................... 17:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Interim
Fuel Tank Capacity, gal (L) .................... 27.7 (105.0)
Oil Capacity, qts (L) .................... 11.8 (11.0)
Coolant Capacity, qts (L) .................... 14.8 (14.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 12.00x16.5
Rear Tire Size .................... 12.00x16.5
Chaincase Capacity, qts (L) .................... 9.2 (8.8)
Maximum Speed (Single), mph (kph) .................... 7.5 (12.1)
Maximum Speed (Two), mph (kph) .................... 11.5 (18.5)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 20.0 (76.0)
Pump Flow (High Flow), gpm (Lpm) .................... 30.0 (112.0)
System Pressure, Bar (psi) .................... 230 (3336)
Hydraulic Tank Capacity, gal (L) .................... 10.3 (39.0)
Hydraulic System Capacity, gal (L) .................... 13.2 (50.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 2150 (975)
Tipping Load, lbs (kg) .................... 4300 (1950)
Bucket Breakout Force, lbs (kg) .................... 5035 (2285)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 43.5 (1105)
Height (Operator Cab), in (mm) .................... 83.1 (2110)
Height (Boom Raised), in (mm) .................... 154.2 (3915)
Length (w/o Bucket), in (mm) .................... 108.9 (2765)
Length (Bucket On Ground), in (mm) .................... 137.3 (3485)
Width (w/o Bucket), in (mm) .................... 65.8 (1670)
Height to Hinge Pin (Fully Raised), in (mm) .................... 121.1 (3075)
Height to Hinge Pin (Carry Position), in (mm) .................... 7.9 (200)
Dump Angle At Max Height, deg .................... 52
Dump Height (Fully Raised), in (mm) .................... 90 (2285)
Dump Reach At Max Height, in (mm) .................... 21.7 (550)
Rollback Angle At Max Height, deg .................... 87
Departure Angle, deg .................... 27
Bucket Width, in (mm) .................... 66 (1675)
Ground Clearance, in (mm) .................... 8.7 (220)
Turning Radius (Front, w/Bucket), in (mm) .................... 83 (2105)
Turning Radius (Front, w/o Bucket), in (mm) .................... 51.8 (1315)
Turning Radius (Rear), in (mm) .................... 64.5 (1640)
Shipping Weight, lbs (kg) .................... 6400 (2910)
Operating Weight, lbs (kg) .................... 6980 (3165)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |