____________________________________________________________________________________

Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 236

Caterpillar 236 Specifications

The Caterpillar 236 skid steer loader driveline system components: 181 cu.in (3.0L) Caterpillar 3034 four-cylinder direct injection naturally aspirated diesel engine with a rated power of 59 hp (44 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 22 gal/min (83 l/min). The system relief pressure is 3336 psi (230 bar). The Cat 236 is equipped with radial-lift loader boom, 80HS drive chains, and 10x16.5 tires. The loader has a boom breakout force of 4335 lbs (1970 kg) and bucket breakout force of 5250 lbs (2385 kg). The rated operating capacity is 1750 lbs (793 kg), and tipping load is 3500 lbs (1590 kg).

Engine Specs

Engine Model .................... Caterpillar 3034
Engine Type .................... 4-cycle liquid cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 181 (2.96)
Cylinder Bore, in (mm) .................... 3.82 (97.0)
Piston Stroke, in (mm) .................... 3.94 (100.0)
Aspiration Type .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 59.0 (44.0)
Maximum Engine Power, hp (kW) .................... 63.0 (47.0)
Rated Engine Speed, rpm .................... 2600
Compression Ratio .................... 17.5:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 2 Interim
Fuel Tank Capacity, gal (L) .................... 23.7 (90.0)
Oil Capacity, qts (L) .................... 7.4 (7.0)
Coolant Capacity, qts (L) .................... 10.5 (10.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 55

Drive Train

Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size (Std) .................... 10.00x16.5
Rear Tire Size (Std) .................... 10.00x16.5
Front Tire Size (Opt) .................... 12.00x16.5
Rear Tire Size (Opt) .................... 12.00x16.5
Chaincase Capacity, qts (L) .................... 7.4 (7.0)
Maximum Speed (Single), mph (kph) .................... 7.6 (12.1)
Maximum Speed (Two), mph (kph) .................... 11.9 (19.1)

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow, gpm (Lpm) .................... 22.0 (83.0)
System Pressure, Bar (psi) .................... 230 (3336)
Hydraulic Tank Capacity, gal (L) .................... 9.2 (35.0)
Hydraulic System Capacity, gal (L) .................... 13.7 (52.0)

Loader Performance

Rated Operating Capacity, lbs (kg) .................... 1750 (793)
Tipping Load, lbs (kg) .................... 3500 (1590)
Lift Breakout Force, lbs (kg) .................... 4335 (1970)
Bucket Breakout Force, lbs (kg) .................... 5250 (2385)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................... 44.7 (1135)
Height (Operator Cab), in (mm) .................... 82.3 (2090)
Height (Boom Raised), in (mm) .................... 156.2 (3965)
Length (w/o Bucket), in (mm) .................... 110.2 (2800)
Length (Bucket On Ground), in (mm) .................... 138.4 (3515)
Width (w/o Bucket), in (mm) .................... 65.8 (1670)
Height to Hinge Pin (Fully Raised), in (mm) .................... 122 (3100)
Height to Hinge Pin (Carry Position), in (mm) .................... 10.1 (255)
Dump Angle At Max Height, deg .................... 40
Dump Height (Fully Raised), in (mm) .................... 94.5 (2400)
Dump Reach At Max Height, in (mm) .................... 21.3 (540)
Rollback Angle At Max Height, deg .................... 97
Departure Angle, deg .................... 28
Bucket Width, in (mm) .................... 66 (1675)
Ground Clearance, in (mm) .................... 9.3 (235)
Turning Radius (Front, w/Bucket), in (mm) .................... 82.5 (2095)
Turning Radius (Front, w/o Bucket), in (mm) .................... 52 (1320)
Turning Radius (Rear), in (mm) .................... 64 (1625)
Shipping Weight, lbs (kg) .................... 6330 (2875)
Operating Weight, lbs (kg) .................... 6840 (3110)

____________________________________________________________________________________

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS