| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 226D |
Caterpillar 226D Specifications
The
Caterpillar 226D skid steer loader is powered by 134.3 cu.in (2.2L) Caterpillar
C2.2T 4-cycle 4-cylinder turbocharged liquid-cooled diesel engine with a rated
power of 65.8 hp (49.1 kW) at 3000 rpm. The Cat 226D is equipped with a
radial-lift loader boom, one-speed or two-speed hydrostatic transmission, 80HS
drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump
with fluid flow rate of 18 gpm (69 lpm) or 26 gpm (99 lpm). The skid steer
loader has a rated operating capacity of 1550 lbs (703 kg) and tipping load of
3100 lbs (1407 kg). The lift height is 111 inches (2820 mm) to hinge pin, and
dump height is 81.8 inches (2075 mm).
| Engine Specs |
Engine Model .................... Caterpillar C2.2T
Engine Type .................... 4-cycle liquid-cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 134.3 (2.19)
Cylinder Bore, in (mm) .................... 3.31 (84.0)
Piston Stroke, in (mm) .................... 3.94 (100.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 65.8 (49.1)
Maximum Engine Power, hp (kW) .................... 67.1 (50.1)
Rated Engine Speed, rpm .................... 3000
Compression Ratio .................... 23.3:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct Injection
Air Cleaner .................... Dual element, radial seal
Emission Level .................... Tier 4 Final
Valve Lash, in (mm) .................... 0.008 (0.20)
Fuel Tank Capacity, gal (L) .................... 15.1 (57.0)
Oil Capacity, qts (L) .................... 10.6 (10.0)
Coolant Capacity, qts (L) .................... 12.7 (12.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80
| Drive Train |
Drive System Type .................... Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) .................... Single
Number of Gears (Opt) .................... Two (low-high)
Chain Drive Type .................... 80HS continuous roller chain
Brakes Type .................... Wet multi disc
Front Tire Size .................... 10.00x16.5
Rear Tire Size .................... 10.00x16.5
Chaincase Capacity, qts (L) .................... 7.4 (7.0)
Maximum Speed (Single), mph (kph) .................... 7.6 (12.3)
Maximum Speed (Two), mph (kph) .................... 11.1 (17.8)
| Hydraulic System |
Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow (Standard), gpm (Lpm) .................... 18.0 (69.0)
Pump Flow (High Flow), gpm (Lpm) .................... 26.0 (99.0)
System Pressure, Bar (psi) .................... 230 (3336)
Hydraulic Tank Capacity, gal (L) .................... 9.0 (34.0)
Hydraulic System Capacity, gal (L) .................... 11.9 (45.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) .................... 1550 (703)
Tipping Load, lbs (kg) .................... 3100 (1407)
Bucket Breakout Force, lbs (kg) .................... 3985 (1807)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase, in (mm) .................... 41.5 (1055)
Height (Operator Cab), in (mm) .................... 79.9 (2030)
Height (Boom Raised), in (mm) .................... 143.8 (3650)
Length (w/o Bucket), in (mm) .................... 99.4 (2525)
Length (Bucket On Ground), in (mm) .................... 127.3 (3235)
Width (w/o Bucket), in (mm) .................... 58.9 (1495)
Height to Hinge Pin (Fully Raised), in (mm) .................... 111 (2820)
Height to Hinge Pin (Carry Position), in (mm) .................... 8.5 (215)
Dump Angle At Max Height, deg .................... 47
Dump Height (Fully Raised), in (mm) .................... 81.8 (2075)
Dump Reach At Max Height, in (mm) .................... 21 (535)
Rollback Angle At Max Height, deg .................... 89
Departure Angle, deg .................... 28
Bucket Width, in (mm) .................... 60 (1520)
Ground Clearance, in (mm) .................... 6.9 (175)
Turning Radius (Front, w/Bucket), in (mm) .................... 77.8 (1975)
Turning Radius (Front, w/o Bucket), in (mm) .................... 43.5 (1105)
Turning Radius (Rear), in (mm) .................... 59.6 (1515)
Shipping Weight, lbs (kg) .................... 5250 (2360)
Operating Weight, lbs (kg) .................... 5700 (2585)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |