____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 226D |
Caterpillar 226D Maintenance
The
Caterpillar 226D skid steer loader is powered by 134.3 cu.in (2.2L) Caterpillar
C2.2T 4-cycle 4-cylinder turbocharged liquid-cooled diesel engine with a rated
power of 65.8 hp (49.1 kW) at 3000 rpm. The Cat 226D is equipped with a
radial-lift loader boom, one-speed or two-speed hydrostatic transmission, 80HS
drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump
with fluid flow rate of 18 gpm (69 lpm) or 26 gpm (99 lpm). The skid steer
loader has a rated operating capacity of 1550 lbs (703 kg) and tipping load of
3100 lbs (1407 kg). The lift height is 111 inches (2820 mm) to hinge pin, and
dump height is 81.8 inches (2075 mm).
| Refill Capacities |
Fuel Tank Capacity, gal (L) .................... 15.1 (57.0)
Engine Oil Capacity, gal (L) ...................... 2.7 (10.0)
Engine Coolant Capacity, gal (L) ...................... 3.2 (12.0)
Hydraulic Tank Fluid Capacity, gal (L) ...................... 9.0 (34.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 11.9 (45.0)
Chain Case Oil Capacity, gal (L) ...................... 1.85 (7.0)
| Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CE, CF-4, CG-4, CH-4
Engine Coolant Type ...................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type ...................... Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type ...................... Cat DEO, SAE 15W-40, 5W-40
| Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check and Adjust Belts ...................... Every 250 Hours
Clean Cab Air Filters ...................... Every 250 Hours
Clean Primary Engine Air Filter ...................... Every 250 Hours
Check and Adjust Drive Chain ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Check Chain Case Oil Level ...................... Every 500 Hours
Replace Hydraulic Tank Breather ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Engine Air Filter ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 1000 Hours
Replace Cab Air Filters ...................... Every 1000 Hours
Service And Refill Cooling System ...................... Every 3000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number ...................... 220-1523
Primary Fuel Filter. Part Number ...................... 363-5819
In-line Fuel Filter. Part Number ...................... 416-5884
Primary Engine Air Filter. Part Number ...................... 415-2592
Secondary Engine Air Filter. Part Number ...................... 415-2593
Hydraulic Oil Filter. Part Number ...................... 421-5479
Hydraulic Tank Breather. Part Number ...................... 420-9748
Cab Air Filter. Part Number ...................... 265-6619, 265-6618
Engine Drive Belt. Part Number ...................... 513-8590
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |