Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 216B |
Caterpillar 216B Maintenance
The Cat 216B skid steer loader is powered by 134.1 cu.in (2.2L) Caterpillar 3024C 4-cylinder direct injection naturally aspirated diesel engine with a rated power of 49 hp (37 kW) at 2600 rpm. The Cat 216B is equipped with a single-speed transmission, wet multi disc brakes, 80HS continuous roller chains, and 7.00x15 or 10x16.5 tires. The hydraulic system has a pump with fluid flow rate of 15.6 gpm (60 lpm). The hydraulic pressure is 3100 psi (214 bar). The skid steer loader has a rated operating capacity of 1400 lbs (635 kg) and tipping load of 2800 lbs (1270 kg). The boom lifting force is 3057 lbs (1385 kg), and bucket breakout force is 3787 lbs (1715 kg).
Refill Capacities |
Engine Oil Capacity, gal (L) ...................... 2.1 (8.0)
Engine Coolant Capacity, gal (L) ...................... 2.65 (10.0)
Hydraulic Reservoir Fluid Capacity, gal (L) ...................... 9.2 (35.0)
Hydraulic System Fluid Capacity, gal (L) ...................... 14.5 (55.0)
Chain Case Oil Capacity, gal (L) ...................... 1.6 (6.0)
Recommended Oil and Fluid |
Engine Oil Type ...................... SAE 10W-30, 15W-40. API Service Category CE, CF-4, CG-4, CH-4
Engine Coolant Type ...................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type ...................... Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type ...................... Cat DEO, SAE 15W-40, 5W-40
Service Intervals |
Lubricate Cylinder Pivot Points ...................... Every 100 Hours
Check and Adjust Belts ...................... Every 250 Hours
Clean Cab Air Filters ...................... Every 250 Hours
Clean Primary Engine Air Filter ...................... Every 250 Hours
Check and Adjust Drive Chain ...................... Every 250 Hours
Change Engine Oil ...................... Every 500 Hours
Replace Engine Oil Filter ...................... Every 500 Hours
Replace Primary Fuel Filter ...................... Every 500 Hours
Replace Final Fuel Filter ...................... Every 500 Hours
Replace Hydraulic Oil Filter ...................... Every 500 Hours
Check Chain Case Oil Level ...................... Every 500 Hours
Change Chain Case Oil ...................... Every 1000 Hours
Replace Primary Engine Air Filter ...................... Every 1000 Hours
Replace Secondary Engine Air Filter ...................... Every 1000 Hours
Change Hydraulic Fluid ...................... Every 2000 Hours
Replace Cab Air Filters ...................... Every 2000 Hours
Service And Refill Cooling System ...................... Every 6000 Hours
Replacement Parts |
Engine Oil Filter. Part Number ...................... 2201523
Fuel Water Separator. Part Number ...................... 1561200
In-line Fuel Filter. Part Number ...................... 1G7206
Primary Engine Air Filter. Part Number ...................... 2310167
Secondary Engine Air Filter. Part Number ...................... 2310168
Cab Air Filter. Part Number ...................... 2318132, 3036658
Hydraulic Oil Filter. Part Number ...................... 1G8878
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |