| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SV185 |
Case SV185 Specifications
The
Case SV185 skid steer loader driveline system components: ISM Shibaura N844LT
4-cycle 4-cylinder turbocharged water-cooled diesel engine with a rated power of
57 hp (42.3 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic
system has a pump with a rated capacity of 19.1 gal/min (72 l/min) or 28.7
gal/min (109 l/min). The Case SV185 is equipped with a vertical-lift loader
boom, ASA 80 drive chains, and 10.00x16.5 standard tires. The loader has a boom
breakout force of 3450 lbs (1570 kg) and bucket breakout force of 5550 lbs (2520
kg). The rated operating capacity is 1850 lbs (840 kg), and tipping load is 3700
lbs (1680 kg).
| Engine Specs |
Engine Model ..................... ISM Shibaura N844LT-D-ROW
Engine Type ..................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ..................... 4
Total Displacement, cu.in (L) ..................... 135.2 (2.22)
Cylinder Bore, in (mm) ..................... 3.31 (84.0)
Piston Stroke, in (mm) ..................... 3.94 (100.0)
Rated Engine Power, hp (kW) ..................... 57.0 (42.3)
Rated Engine Speed, rpm ..................... 2800
Maximum Torque, Nm (lb-ft) ..................... 171 (126)
Torque Speed, rpm ..................... 1800
Idling Speed, rpm ..................... 1150-2850
Aspiration Type ..................... Turbocharged
Compression Ratio ..................... 22.5:1
Firing Order ..................... 1-3-4-2
Fuel System ..................... Indirect injection
Fuel Injection Pump ..................... Mechanical
Fuel Filter Type ..................... In-line strainer
Air Cleaner Type ..................... Dry, dual element
Lubricating System ..................... Forced with trochoid pump
Oil Filter Type ..................... Full flow
Cooling System ..................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ..................... 20.0 (75.7)
Engine Oil Capacity, qts (L) ..................... 7.5 (7.1)
Coolant Capacity, qts (L) ..................... 16.5 (15.5)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120
| Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 80 roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 12.00x16.5
Rear Tire Size (Opt) ..................... 12.00x16.5
Chaincase Capacity, qts (L) ..................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ..................... 7.9 (12.7)
Maximum Speed (Two), mph (km/h) ..................... 11.2 (18.0)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 19.1 (72.0)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 28.7 (109.0)
System Pressure, Bar (psi) ..................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ..................... 4.3 (16.3)
Hydraulic System Capacity, gal (L) ..................... 10.0 (37.9)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1850 (840)
Tipping Load, lbs (kg) ..................... 3700 (1680)
Breakout force (Boom), lbs (kg) ..................... 3450 (1570)
Breakout force (Bucket), lbs (kg) ..................... 5550 (2520)
Loader Boom Type ................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 44.4 (1125)
Height (Operator Cab), in (mm) ..................... 77.7 (1975)
Height (Boom Raised), in (mm) ..................... 150.4 (3820)
Length (w/o Bucket), in (mm) ..................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ..................... 131.7 (3350)
Width (w/o Bucket), in (mm) ..................... 53.9 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 120 (3050)
Dump Angle At Max Height, deg ..................... 52
Dump Height (Fully Raised), in (mm) ..................... 93.7 (2380)
Dump Reach At Max Height, in (mm) ..................... 30.8 (780)
Rollback Angle At Ground Level, deg ..................... 35
Rollback Angle At Max Height, deg ..................... 88
Departure Angle, deg ..................... 23
Bucket Width, in (mm) ..................... 66 (1675)
Ground Clearance, in (mm) ..................... 7.0 (177)
Turning Radius (Front w/Bucket), in (mm) ..................... 79.6 (2020)
Turning Radius (Front w/o Bucket), in (mm) ..................... 50.7 (1285)
Turning Radius (Rear), in (mm) ..................... 62.9 (1600)
Shipping Weight, lbs (kg) ..................... 6270 (2840)
Operating Weight, lbs (kg) ..................... 6570 (2980)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |