Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR270B

Case SR270B Specifications

The Case SR270B skid steer loader is powered by FPT F5B FL413 four-cylinder direct injection turbocharged diesel engine with a rated power of 84 hp (63 kW) at 2500 rpm. The Case SR270B is equipped with a radial-lift loader boom, single-speed or two-speed hydrostatic transmission, ASA 100 drive chains, and 12.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 24.2 gpm (91.5 lpm) or 37.6 gpm (142.5 lpm). The skid steer loader has a rated operating capacity of 2700 lbs (1225 kg) and tipping load of 5400 lbs (2450 kg). The lift height is 125.1 inches (3180 mm) to hinge pin, and dump height is 100.9 inches (2560 mm).

Engine Specs

Engine Model ..................... FPT F5B FL413
Engine Type ..................... 4-Stroke direct injection turbocharged diesel
Number of Cylinders ..................... 4
Displacement, cu in (L) ..................... 207 (3.4)
Engine Bore, in (mm) ..................... 3.89 (99.0)
Engine Stroke, in (mm) ..................... 4.33 (110.0)
Aspiration Type ..................... Turbocharged
Rated Engine Power, hp (kW) ..................... 84.0 (63.0)
Rated Engine Speed, rpm ..................... 2500
Maximum Torque, Nm (ft-lb) ..................... 383 (282)
Torque Speed, rpm ..................... 1400
High Idle Speed, rpm ..................... 2500
Low Idle Speed, rpm ..................... 1100
Firing Order ..................... 1-3-4-2
Fuel System ..................... Direct injection
Fuel Injection Pump ..................... Mechanical
Governor Type ..................... Mechanical
Lubricating System ..................... Forced lubrication
Oil Filter Type ..................... Full-flow cartridge
Cooling System ..................... Pressurized
Water Pump Type ..................... Centrifugal
Air Cleaner Type ..................... Dry element
Fuel Tank Capacity, gal (L) ..................... 25.5 (96.5)
Oil Capacity, qts (L) ..................... 8.9 (8.5)
Coolant Capacity, qts (L) ..................... 20.0 (19.0)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 160

Drive Train

Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 100 roller chain
Front Tire Size (Std) ..................... 12.00x16.5
Rear Tire Size (Std) ..................... 12.00x16.5
Front Tire Size (Opt) ..................... 33x15.5x16.5
Rear Tire Size (Opt) ..................... 33x15.5x16.5
Chaincase Capacity, qts (L) ..................... 23.3 (22.2)
Maximum Speed (Single), mph (km/h) ..................... 7.0 (11.2)
Maximum Speed (Two), mph (km/h) ..................... 10.5 (16.9)

Hydraulic System

Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 24.2 (91.5)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 37.6 (142.5)
System Pressure, Bar (psi) ..................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ..................... 6.0 (22.7)
Hydraulic System Capacity, gal (L) ..................... 11.8 (44.5)

Loader Performance

Rated Operating Capacity, lbs (kg) ..................... 2700 (1225)
Tipping Load, lbs (kg) ..................... 5400 (2450)
Breakout force (Boom), lbs (kg) ..................... 6100 (2770)
Breakout force (Bucket), lbs (kg) ..................... 8680 (3945)
Loader Boom Type ................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ..................... 52 (1320)
Height (Operator Cab), in (mm) ..................... 78.8 (2000)
Height (Boom Raised), in (mm) ..................... 156.3 (3970)
Length (w/o Bucket), in (mm) ..................... 118.7 (3010)
Length (Bucket On Ground), in (mm) ..................... 143.9 (3660)
Width (w/o Bucket), in (mm) ..................... 56.9 (1445)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 125.1 (3180)
Dump Angle At Max Height, deg ..................... 38
Dump Height (Fully Raised), in (mm) ..................... 100.9 (2560)
Dump Reach At Max Height, in (mm) ..................... 22.2 (565)
Rollback Angle At Ground Level, deg ..................... 31
Rollback Angle At Max Height, deg ..................... 100
Departure Angle, deg ..................... 24
Bucket Width, in (mm) ..................... 72 (1830)
Ground Clearance, in (mm) ..................... 8.0 (203)
Turning Radius (Front w/Bucket), in (mm) ..................... 83.5 (2120)
Turning Radius (Front w/o Bucket), in (mm) ..................... 53.7 (1370)
Turning Radius (Rear), in (mm) ..................... 71.2 (1810)
Shipping Weight, lbs (kg) ..................... 7770 (3525)
Operating Weight, lbs (kg) ..................... 8120 (3680)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS