Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR175

Case SR175 Specifications

The Case SR175 skid steer loader driveline system components: ISM Shibaura N844LTA 4-cylinder turbocharged intercooled diesel engine with a rated power of 64 hp (47.6 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 20.6 gal/min (78 l/min) or 30.7 gal/min (116.2 l/min). The Case SR175 is equipped with a radial-lift loader boom, ASA 80 drive chains, and 10x16.5 standard tires. The skid steer loader has a maximum lift height of 122" (3100 mm) to hinge pin and dump height of 97.2" (2470 mm). The rated operating capacity is 1750 lbs (790 kg), and tipping load is 3500 lbs (1590 kg).

Engine Specs

Engine Model ..................... ISM Shibaura N844LTA-DI-F-50
Engine Type ..................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ..................... 4
Total Displacement, cu.in (L) ..................... 135.2 (2.22)
Cylinder Bore, in (mm) ..................... 3.31 (84.0)
Piston Stroke, in (mm) ..................... 3.94 (100.0)
Rated Engine Power, hp (kW) ..................... 64.0 (47.6)
Rated Engine Speed, rpm ..................... 2800
Maximum Torque, Nm (lb-ft) ..................... 208 (153)
Torque Speed, rpm ..................... 1800
Idling Speed, rpm ..................... 1150-2850
Aspiration Type ..................... Turbocharged and intercooled
Compression Ratio ..................... 22.5:1
Firing Order ..................... 1-3-4-2
Fuel System ..................... Common rail direct injection
Air Cleaner Type ..................... Dry, dual element
Lubricating System ..................... Pressure feed with trochoid pump
Oil Filter Type ..................... Full flow
Cooling System ..................... Liquid-cooled with radiator
Water Pump Type ..................... Centrifugal
Emission Level ..................... Tier 4 Final
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.8)
Engine Oil Capacity, qts (L) ..................... 7.5 (7.1)
Coolant Capacity, qts (L) ..................... 16.5 (15.5)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120

Drive Train

Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 80 roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 12.00x16.5
Rear Tire Size (Opt) ..................... 12.00x16.5
Chaincase Capacity, qts (L) ..................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ..................... 7.4 (11.9)
Maximum Speed (Two), mph (km/h) ..................... 10.8 (17.4)

Hydraulic System

Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 20.6 (78.0)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 30.7 (116.2)
System Pressure, Bar (psi) ..................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ..................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ..................... 8.5 (32.2)

Loader Performance

Rated Operating Capacity, lbs (kg) ..................... 1750 (790)
Tipping Load, lbs (kg) ..................... 3500 (1590)
Breakout force (Boom), lbs (kg) ..................... 3810 (1730)
Breakout force (Bucket), lbs (kg) ..................... 7270 (3305)
Loader Boom Type ................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ..................... 44.4 (1125)
Height (Operator Cab), in (mm) ..................... 77.7 (1975)
Height (Boom Raised), in (mm) ..................... 153.4 (3895)
Length (w/o Bucket), in (mm) ..................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ..................... 130.1 (3305)
Width (w/o Bucket), in (mm) ..................... 53.9 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 122 (3100)
Dump Angle At Max Height, deg ..................... 39
Dump Height (Fully Raised), in (mm) ..................... 97.2 (2470)
Dump Reach At Max Height, in (mm) ..................... 24.4 (620)
Rollback Angle At Ground Level, deg ..................... 32
Rollback Angle At Max Height, deg ..................... 98
Departure Angle, deg ..................... 23
Bucket Width, in (mm) ..................... 66 (1675)
Ground Clearance, in (mm) ..................... 7.0 (177)
Turning Radius (Front w/Bucket), in (mm) ..................... 78.4 (1990)
Turning Radius (Front w/o Bucket), in (mm) ..................... 50.7 (1285)
Turning Radius (Rear), in (mm) ..................... 62.9 (1600)
Shipping Weight, lbs (kg) ..................... 5970 (2705)
Operating Weight, lbs (kg) ..................... 6270 (2840)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS