Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR130 |
Case SR130 Specifications
The Case SR130 skid steer loader is powered by 135.1 cu.in (2.2L) ISM Shibaura N844L 4-cylinder vertical in-line water-cooled diesel engine with a rated power of 46 hp (34.1 kW) at 2800 rpm. The Case SR130 is equipped with a radial-lift loader boom, single-speed hydrostatic transmission, ASA 80 drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 15.6 gpm (59 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 1300 lbs (590 kg) and tipping load of 2600 lbs (1180 kg). The lift height is 112 inches (2845 mm) to hinge pin, and dump height is 88.4 inches (2245 mm).
Engine Specs |
Engine Model ..................... ISM Shibaura N844L D-ROW
Engine Type ..................... 4-cycle vertical in-line water-cooled diesel
Number of Cylinders ..................... 4
Total Displacement, cu.in (L) ..................... 135.1 (2.22)
Cylinder Bore, in (mm) ..................... 3.31 (84.0)
Piston Stroke, in (mm) ..................... 3.94 (100.0)
Rated Engine Power, hp (kW) ..................... 46.0 (34.1)
Rated Engine Speed, rpm ..................... 2800
Maximum Torque, Nm (lb-ft) ..................... 143 (106)
Torque Speed, rpm ..................... 1800
Idling Speed, rpm ..................... 1050-3150
Aspiration Type ..................... Naturally aspirated
Compression Ratio ..................... 22.5:1
Firing Order ..................... 1-3-4-2
Fuel System ..................... Indirect injection
Fuel Injection Pump ..................... Mechanical
Fuel Filter Type ..................... In-line strainer
Air Cleaner Type ..................... Dry, dual element
Lubricating System ..................... Forced with trochoid pump
Oil Filter Type ..................... Full flow
Cooling System ..................... Liquid-cooled with radiator
Fuel Tank Capacity, gal (L) ..................... 16.0 (60.5)
Engine Oil Capacity, qts (L) ..................... 11.1 (10.5)
Coolant Capacity, qts (L) ..................... 15.9 (15.0)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120
Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... ASA 80 roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 27x10.5x15
Rear Tire Size (Opt) ..................... 27x10.5x15
Chaincase Capacity, qts (L) ..................... 6.6 (6.3)
Maximum Speed, mph (km/h) ..................... 7.9 (12.7)
Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 15.6 (59.0)
System Pressure, Bar (psi) ..................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ..................... 4.0 (15.1)
Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1300 (590)
Tipping Load, lbs (kg) ..................... 2600 (1180)
Breakout force (Boom), lbs (kg) ..................... 2850 (1295)
Breakout force (Bucket), lbs (kg) ..................... 4180 (1900)
Loader Boom Type ................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 37 (940)
Height (Operator Cab), in (mm) ..................... 75.5 (1915)
Height (Boom Raised), in (mm) ..................... 141.4 (3590)
Length (w/o Bucket), in (mm) ..................... 95.9 (2435)
Length (Bucket On Ground), in (mm) ..................... 119.2 (3025)
Width (w/o Bucket), in (mm) ..................... 49.2 (1250)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 112 (2845)
Dump Angle At Max Height, deg ..................... 40
Dump Height (Fully Raised), in (mm) ..................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ..................... 18.5 (470)
Rollback Angle At Ground Level, deg ..................... 26
Rollback Angle At Max Height, deg ..................... 95
Departure Angle, deg ..................... 22
Bucket Width, in (mm) ..................... 60 (1525)
Ground Clearance, in (mm) ..................... 7.0 (177)
Turning Radius (Front w/Bucket), in (mm) ..................... 73.3 (1860)
Turning Radius (Front w/o Bucket), in (mm) ..................... 48.7 (1235)
Turning Radius (Rear), in (mm) ..................... 56.4 (1430)
Shipping Weight, lbs (kg) ..................... 4770 (2160)
Operating Weight, lbs (kg) ..................... 5070 (2300)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |