Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 430 |
Case 430 Series 3 Specifications
The Case 430 Series 3 skid steer loader is powered by 195 cu.in (3.2L) Case 432T/M3 4-cylinder direct injection turbocharged diesel engine with a rated power of 82 hp (61 kW) at 2500 rpm. The Case 430 is equipped with a two-speed transmission, planetary single reduction, 100HV continuous roller chains, and 12x16.5 standard tires. The open center hydraulic system has a pump with fluid flow rate of 23.8 gpm (90 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer loader has a rated operating capacity of 2000 lbs (907 kg) and tipping load of 4000 lbs (1815 kg). The boom lifting force is 4305 lbs (1955 kg), and bucket breakout force is 5785 lbs (2630 kg).
Engine Specs |
Engine Model .................. Case 432T/M3
Engine Type .................. 4-Stroke direct injection turbocharged diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 195 (3.20)
Engine Bore, in (mm) .................. 3.9 (99.0)
Engine Stroke, in (mm) .................. 4.1 (104.0)
Aspiration .................. Turbocharged
Rated Engine Power, hp (kW) .................. 82.0 (61.0)
Rated Engine Speed, rpm .................. 2500
Maximum Torque, Nm (ft-lb) .................. 310 (229)
Torque Speed, rpm .................. 1400
High Idle Speed, rpm .................. 2750
Low Idle Speed, rpm .................. 1150
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Fuel Filter Type.................... In-line strainer
Governor Type .................. Mechanical
Lubricating System .................. Positive pressure
Oil Filter Type.................... Full-flow cartridge
Cooling System .................. Pressurized
Water Pump Type .................. Centrifugal
Air Cleaner Type .................. Dry element
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)
Oil Capacity, qts (L) .................. 9.0 (8.5)
Coolant Capacity, qts (L) .................. 12.0 (11.4)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 95
Drive Train |
Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. 2 (Low/High)
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HV continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single reduction planetary to chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Low), mph (kph) .................. 7.7 (12.4)
Forward Speed (High), mph (kph) .................. 12.6 (20.2)
Reverse Speed (Low), mph (kph) .................. 7.7 (12.4)
Reverse Speed (High), mph (kph) .................. 12.6 (20.2)
Hydraulic System |
Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow (Std), gpm (Lpm) .................. 23.8 (90.0)
Pump Flow (Opt), gpm (Lpm) .................. 33.2 (126.0)
System Pressure, Bar (psi) .................. 210 (3050)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.3)
Number of Valves .................. 3
Loader Performance |
Rated Operating Capacity, lbs (kg) .................. 2000 (907)
Tipping Load, lbs (kg) .................. 4000 (1815)
Boom Lifting Force, lbs (kg) .................. 4305 (1955)
Bucket Breakout Force, lbs (kg) .................. 5785 (2630)
Loader Boom Type .................. Radial-lift
Dimensions and Weight |
Wheelbase, in (mm) .................. 42.3 (1070)
Height (Operator Cab), in (mm) .................. 80 (2030)
Height (Boom Raised), in (mm) .................. 154 (3910)
Length (w/o Bucket), in (mm) .................. 102.5 (2600)
Length (Bucket On Ground), in (mm) .................. 129.4 (3290)
Width (w/o Bucket), in (mm) .................. 51.8 (1320)
Height to Hinge Pin (Fully Raised), in (mm) .................. 121.6 (3090)
Dump Angle At Max Height, deg .................. 39
Dump Height (Fully Raised), in (mm) .................. 96 (2440)
Dump Reach At Max Height, in (mm) .................. 22.8 (580)
Rollback Angle At Ground Level, deg .................. 29
Rollback Angle At Max Height, deg .................. 96
Departure Angle, deg .................. 28
Bucket Width, in (mm) .................. 66 (1680)
Ground Clearance, in (mm) .................. 9.2 (235)
Turning Radius (w/Bucket), in (mm) .................. 78.7 (1950)
Shipping Weight, lbs (kg) .................. 6150 (2790)
Operating Weight, lbs (kg) .................. 6800 (3085)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |