____________________________________________________________________________________
| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 430 |
Case 430 Maintenance
The
Case 430 Series 3 skid steer loader is powered by 195 cu.in (3.2L) Case 432T/M3
4-cylinder direct injection turbocharged diesel engine with a rated power of 82
hp (61 kW) at 2500 rpm. The Case 430 is equipped with a two-speed transmission,
planetary single reduction, 100HV continuous roller chains, and 12x16.5 standard
tires. The open center hydraulic system has a pump with fluid flow rate of 23.8
gpm (90 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer
loader has a rated operating capacity of 2000 lbs (907 kg) and tipping load of
4000 lbs (1815 kg). The boom lifting force is 4305 lbs (1955 kg), and bucket
breakout force is 5785 lbs (2630 kg).
| Refill Capacities |
Engine Oil Capacity, gal (L) .................. 2.25 (8.5)
Engine Coolant Capacity, gal (L) .................. 3.0 (11.4)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.2)
Chain Case Oil Capacity, qts (L) .................. 8.0 (7.6)
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)
| Recommended Oil and Fluid |
Engine Oil Type .................. SAE 15W-40. API Service Category CH-4
Engine Coolant Type .................. Extended-Life Coolant/Antifreeze
Hydraulic Fluid Type .................. SAE 10W-30
Chain Case Oil Type .................. SAE 10W-30
| Service Intervals |
Lubricate Cylinder Pivot Points .................. Every 50 Hours
Check Hydraulic Fluid Level .................. Every 50 Hours
Check Chain Case Oil Level .................. Every 50 Hours
Check Battery Connections .................. Every 100 Hours
Check Alternator/Fan Belt Tension .................. Every 100 Hours
Check Drive Chain Tension .................. Every 250 Hours
Clean Primary Air Filter .................. Every 250 Hours
Change Engine Oil .................. Every 500 Hours
Replace Engine Oil Filter .................. Every 500 Hours
Replace Hydraulic Filter Element .................. Every 500 Hours
Replace Fuel Filter Element .................. Every 500 Hours
Replace Primary Air Filter .................. Every 500 Hours
Replace Secondary Air Filter .................. Every 500 Hours
Change Chain Case Oil .................. Every 1000 Hours
Change Hydraulic Fluid .................. Every 1000 Hours
Change Engine Coolant .................. Every 2000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number .................. 87679496, 87679598
Engine Fuel Filter. Part Number .................. 87679502
In-Line Fuel Filter. Part Number .................. 87548612
Primary Engine Air Filter. Part Number .................. 222421A1, 84217229
Secondary Engine Air Filter. Part Number .................. 222422A1, 87682999
Hydraulic Oil Filter. Part Number .................. 87430661, 87010593 (Element)
Alternator Belt. Part Number .................. SBA080109061
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |