Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1838

Case 1838 Specifications

The Case 1838 skid steer loader driveline system components: a 134 cu.in (2.2L) Kubota V2203-DI-B 4-cycle 4-cylinder direct injection naturally aspirated water-cooled diesel engine with a rated power of 46 hp (34 kW), and single-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 15.8 gal/min (59.8 l/min). The Case 1838 is equipped with a radial-lift loader boom, 80HT drive chain, and 10.00x16.5 or 7.50x15 tires. The loader has a boom breakout force of 2775 lbs (1260 kg) and bucket breakout force of 3065 lbs (1395 kg). The rated operating capacity is 1325 lbs (600 kg), and tipping load is 2650 lbs (1200 kg).

Engine Specs

Engine Model ...................... Kubota V2203-DI-B
Engine Type ...................... Vertical 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 155 (115)
Torque Speed, rpm ...................... 1700
Idle Speed, rpm ...................... 1075-2950
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Combustion Chamber ...................... Spherical type (E-TVCS)
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication with filter
Cooling System ...................... Water-cooled
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 19.5 (73.9)
Oil Capacity, qts (L) ...................... 8.0 (7.6)
Coolant Capacity, qts (L) ...................... 12.0 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40

Drive Train

Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 80HT roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 7.50x15
Rear Tire Size (Opt) ..................... 7.50x15
Chaincase Capacity, qts (L) ..................... 5.0 (4.7)
Maximum Speed, mph (km/h) ..................... 6.5 (10.4)

Hydraulic System

Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 15.8 (59.8)
System Pressure, Bar (psi) ..................... 159 (2300)
Hydraulic Reservoir Capacity, gal (L) ..................... 6.2 (23.6)
Hydraulic System Capacity, gal (L) ..................... 10.5 (39.8)

Loader Performance

Rated Operating Capacity, lbs (kg) ..................... 1325 (600)
Tipping Load, lbs (kg) ..................... 2650 (1200)
Breakout force (Bucket), lbs (kg) ..................... 3065 (1395)
Breakout force (Boom), lbs (kg) ..................... 2775 (1260)
Loader Boom Type ................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ..................... 37 (940)
Height (Operator Cab), in (mm) ..................... 77 (1955)
Height (Boom Raised), in (mm) ..................... 145.5 (3695)
Length (w/o Bucket), in (mm) ..................... 96.5 (2450)
Length (Bucket On Ground), in (mm) ..................... 125 (3175)
Width (w/o Bucket), in (mm) ..................... 48.9 (1240)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 110.5 (2805)
Dump Angle At Max Height, deg ..................... 43
Dump Height (Fully Raised), in (mm) ..................... 84 (2135)
Dump Reach At Max Height, in (mm) ..................... 22 (560)
Rollback Angle At Ground Level, deg ..................... 29
Rollback Angle At Max Height, deg ..................... 100
Bucket Width, in (mm) ..................... 54 (1370)
Ground Clearance, in (mm) ..................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ..................... 73 (1855)
Turning Radius (Front w/o Bucket), in (mm) ..................... 44 (1115)
Turning Radius (Rear), in (mm) ..................... 59 (1500)
Shipping Weight, lbs (kg) ..................... 4750 (2160)
Operating Weight, lbs (kg) ..................... 5220 (2365)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS