| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1816B |
Case 1816B Specifications
The
Case 1816B skid steer loader driveline system components: Tecumseh OH160
four-stroke single-cylinder horizontal shaft air-cooled gasoline engine with a
rated power of 16 hp (11.9 kW), and single-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 8 gal/min (30.3 l/min). The
system relief pressure is 1200 psi (82.8 bar). The Case 1816B is equipped with a
radial-lift loader boom, 60H drive chain, and 5.90x15 standard tires. The loader
has a boom breakout force of 1050 lbs (475 kg) and bucket breakout force of 830
lbs (377 kg). The rated operating capacity is 500 lbs (227 kg), and tipping load
is 1035 lbs (470 kg).
| Engine Specs |
Engine Model ..................... Tecumseh OH160
Engine Type ..................... 4-stroke single-cylinder horizontal air-cooled gasoline
Number of Cylinders ..................... 1
Displacement, cu in (L) ..................... 27.7 (0.45)
Cylinder Bore, in (mm) ..................... 3.50 (88.9)
Piston Stroke, in (mm) ..................... 2.88 (73.0)
Rated Engine Power, hp (kW) ..................... 16.0 (11.9)
Rated Engine Speed, rpm ..................... 3600
Maximum Torque, Nm (ft-lb) ..................... 33.9 (25.1)
Torque Speed, rpm ..................... 2800
Fuel System ..................... Carburetor
Carburetor Type ..................... Float, adjustable jet
Governor Type ..................... Mechanical
Lubricating System ..................... Splash type
Cooling System ..................... Air-cooled
Air Cleaner Type ..................... Dry element
Oil Filter Type ..................... Spin-on, full-flow
Ignition System ..................... Solid state magneto
Intake Valve Clearance, in (mm) ..................... 0.005-0.010 (0.13-0.25)
Exhaust Valve Clearance, in (mm) ..................... 0.005-0.010 (0.13-0.25)
Fuel Tank Capacity, gal (L) ..................... 8.5 (32.2)
Oil Capacity, qts (L) ..................... 1.6 (1.5)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 20
| Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 60H roller chain
Front Tire Size (Std) ..................... 5.90x15
Rear Tire Size (Std) ..................... 5.90x15
Front Tire Size (Opt) ..................... 27x8.50x15
Rear Tire Size (Opt) ..................... 27x8.50x15
Maximum Speed, mph (km/h) ..................... 4.8 (7.7)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 8.0 (30.3)
System Pressure, Bar (psi) ..................... 82.8 (1200)
Hydraulic Reservoir Capacity, gal (L) ..................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ..................... 7.0 (26.5)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 500 (227)
Tipping Load, lbs (kg) ..................... 1035 (470)
Breakout force (Bucket), lbs (kg) ..................... 830 (377)
Breakout force (Boom), lbs (kg) ..................... 1050 (475)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 30.3 (770)
Height (Operator Cab), in (mm) ..................... 76.5 (1945)
Height (Boom Raised), in (mm) ..................... 124 (3150)
Length (w/o Bucket), in (mm) ..................... 66.8 (1695)
Length (Bucket On Ground), in (mm) ..................... 91.5 (2325)
Width (w/o Bucket), in (mm) ..................... 29.1 (740)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 96 (2440)
Dump Angle At Max Height, deg ..................... 38
Dump Height (Fully Raised), in (mm) ..................... 74.5 (1890)
Dump Reach At Max Height, in (mm) ..................... 23 (585)
Rollback Angle At Ground Level, deg ..................... 27
Rollback Angle At Max Height, deg ..................... 102
Bucket Width, in (mm) ..................... 35 (890)
Ground Clearance, in (mm) ..................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ..................... 56 (1420)
Turning Radius (Front w/o Bucket), in (mm) ..................... 33 (840)
Turning Radius (Rear), in (mm) ..................... 38 (965)
Shipping Weight, lbs (kg) ..................... 1740 (790)
Operating Weight, lbs (kg) ..................... 2065 (937)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |