____________________________________________________________________________________
| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1816 |
Case 1816 Specifications
The
Case 1816 skid steer loader is powered by 27.7 cubic inches (0.45L) Tecumseh HH160
four-cycle single-cylinder horizontal air-cooled gasoline engine with a rated
power of 16 hp (11.9 kW) at 3600 rpm. The Case 1816 is equipped with a
radial-lift loader boom, 1-speed hydrostatic transmission, 60H drive chains, and
5.90x15 standard tires. The hydraulic system has a pump with fluid flow rate of
8 gpm (30.3 lpm). The hydraulic pressure is 1200 psi (82.8 bar). The skid steer
loader has a rated operating capacity of 500 lbs (227 kg) and tipping load of
1035 lbs (470 kg). The lift height is 96 inches (2440 mm) to hinge pin, and dump
height is 74.5 inches (1890 mm).
| Engine Specs |
Engine Model ..................... Tecumseh HH160
Engine Type ..................... 4-stroke single-cylinder horizontal air-cooled gasoline
Number of Cylinders ..................... 1
Displacement, cu in (L) ..................... 27.7 (0.45)
Cylinder Bore, in (mm) ..................... 3.50 (88.9)
Piston Stroke, in (mm) ..................... 2.88 (73.0)
Rated Engine Power, hp (kW) ..................... 16.0 (11.9)
Rated Engine Speed, rpm ..................... 3600
Maximum Torque, Nm (ft-lb) ..................... 33.9 (25.1)
Torque Speed, rpm ..................... 2800
Fuel System ..................... Carburetor
Carburetor Type ..................... Float, adjustable jet
Governor Type ..................... Mechanical
Lubricating System ..................... Splash type
Cooling System ..................... Air-cooled
Air Cleaner Type ..................... Dry element
Oil Filter Type ..................... Spin-on, full-flow
Ignition System ..................... Solid state magneto
Starter Type ..................... Electric
Spark Plug Gap, in (mm) ..................... 0.030 (0.762)
Fuel Tank Capacity, gal (L) ..................... 8.5 (32.2)
Oil Capacity, qts (L) ..................... 1.6 (1.5)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 20
| Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 60H roller chain
Front Tire Size (Std) ..................... 5.90x15
Rear Tire Size (Std) ..................... 5.90x15
Front Tire Size (Opt) ..................... 27x8.50x15
Rear Tire Size (Opt) ..................... 27x8.50x15
Maximum Speed, mph (km/h) ..................... 4.8 (7.7)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 8.0 (30.3)
System Pressure, Bar (psi) ..................... 82.8 (1200)
Hydraulic Reservoir Capacity, gal (L) ..................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ..................... 7.0 (26.5)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 500 (227)
Tipping Load, lbs (kg) ..................... 1035 (470)
Breakout force (Bucket), lbs (kg) ..................... 830 (377)
Breakout force (Boom), lbs (kg) ..................... 1050 (475)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 30.3 (770)
Height (Operator Cab), in (mm) ..................... 76.5 (1945)
Height (Boom Raised), in (mm) ..................... 124 (3150)
Length (w/o Bucket), in (mm) ..................... 66.8 (1695)
Length (Bucket On Ground), in (mm) ..................... 91.5 (2325)
Width (w/o Bucket), in (mm) ..................... 29.1 (740)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 96 (2440)
Dump Angle At Max Height, deg ..................... 40
Dump Height (Fully Raised), in (mm) ..................... 74.5 (1890)
Dump Reach At Max Height, in (mm) ..................... 23 (585)
Rollback Angle At Ground Level, deg ..................... 27
Rollback Angle At Max Height, deg ..................... 102
Bucket Width, in (mm) ..................... 35 (890)
Ground Clearance, in (mm) ..................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ..................... 56 (1420)
Turning Radius (Front w/o Bucket), in (mm) ..................... 33 (840)
Turning Radius (Rear), in (mm) ..................... 38 (965)
Shipping Weight, lbs (kg) ..................... 1755 (795)
Operating Weight, lbs (kg) ..................... 2030 (920)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |