Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 763 |
Bobcat 763 Specifications
The Bobcat 763 skid steer loader is powered by 134 cu.in (2.2L) Kubota V2203-EB 4-cylinder water-cooled diesel engine with a rated power of 46 hp (34 kW) at 2800 rpm. The Bobcat 763 is equipped with a radial-lift loader boom, 1-speed hydrostatic transmission, 80HS drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 15.6 gpm (59 lpm) or 25.8 gpm (97.8 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 1500 lbs (680 kg) and tipping load of 3000 lbs (1360 kg). The lift height is 114.5" (2910 mm) to hinge pin, and dump height is 86.4" (2195 mm).
Engine Specs |
Engine Model ...................... Kubota V2203-EB
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134 (2.195)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 145 (107)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Cell starter (with glow plug)
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 14.0 (53.0)
Oil Capacity, qts (L) ...................... 7.5 (7.1)
Cooling Capacity, qts (L) ...................... 9.8 (9.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 31x15.5x15
Rear Tire Size (Opt) ...................... 31x15.5x15
Chaincase Capacity, qts (L) ...................... 36.0 (34.0)
Maximum Speed, mph (km/h) ...................... 7.0 (11.3)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 15.6 (59.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 25.8 (97.8)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 6.1 (23.0)
Hydraulic System Capacity, gal (L) ...................... 8.5 (32.2)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1500 (680)
Tipping Load, lbs (kg) ...................... 3000 (1360)
Breakout Force (Lift), lbs (kg) ...................... 2800 (1270)
Breakout Force (Tilt), lbs (kg) ...................... 3100 (1405)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 40.6 (1030)
Height (Operator Cab), in (mm) ...................... 77 (1955)
Height (Boom Raised), in (mm) ...................... 148.2 (3765)
Length (w/o Bucket), in (mm) ...................... 101.7 (2575)
Length (Bucket On Ground), in (mm) ...................... 130.1 (3305)
Width (w/o Bucket), in (mm) ...................... 54.5 (1385)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 44
Dump Height (Fully Raised), in (mm) ...................... 86.4 (2195)
Dump Reach At Max Height, in (mm) ...................... 15.5 (420)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 92
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 78.5 (1995)
Operating Weight, lbs (kg) ...................... 5410 (2455)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |